Sharp LC-70LE835RU, LC-70LE836E Checking signal strength, Channel strength DVB-T/T2*1/C/S*2, S2*2

Initial auto installation
Checking signal strength and			E Checking channel strength			5 Position and align the antenna so that the
			4 Press a/bto select “Channel strength”, and			maximum possible values for “Signal strength”
channel strength (DVB-T/T2*1/C/S*2/
						and “Quality” are obtained.
S2*2)			then press ;.			NOTE
			• You can input a specified frequency band using the
If you install a DVB-T/T2/C/S/S2 antenna for the first			0_9 numeric buttons.			• The values of “Signal strength” and “Quality” indicate
			Channel strength of DVB-T/T2			when to check the appropriate alignment of the
time or relocate it, you should adjust the alignment						antenna.
of the antenna to receive a good reception while			Supply voltage	Frequency	MHz	Supplying power to the antenna
checking the antenna setup screen.			Signal strength
I 836 series only			Channel strength	CH No.		You must supply power to the antenna in order
J 835 series only				Signal strength
						to receive digitally/terrestrially broadcast stations
1 Go to “Menu” > “Setup” > “View setting” >
				Current	Max.	after connecting the antenna cable to the antenna
“Channel settings” > “Antenna setup-DIGITAL”.
				Quality		terminal on the rear of the TV.
2 Press a/bto select “Digital setup” or “Satellite
						1 Go to “Menu” > “Setup” > “View setting” >
setup”, and then press ;.				Current	Max.
						“Channel settings” > “Antenna setup-DIGITAL” >
E Checking signal strength
			Channel strength of DVB-C			“Supply voltage”.
3 Press a/bto select “Signal strength”, and then						2 Press c/dto select “On”, and then press ;.
press ;.			Supply voltage	Frequency	MHz
Signal strength for DVB-T/T2/C			Signal strength
				Symbol rate
			Channel strength
				QAM modulation
Supply voltage
				Signal strength
Signal strength
Channel strength	CH No.			Current	Max.
	Signal strength
				Quality
	Current	Max.		Current	Max.
	Quality
	Current	Max.	Channel strength of DVB-S/S2

Signal strength for DVB-S/S2

Signal strength

Channel strength

Signal strength
	Current	Max.
Quality
	Current	Max.

Signal strength	Frequency	MHz
Channel strength
	Symbol rate
	Band	Vert/Low
	Signal strength
	Current	Max.
	Quality
	Current	Max.

18