Analogue setting, Sort, Erase programme | Sharp LC-70LE836E instruction

Basic adjustment

Analogue setting	Sound sys.	E Sort
		Channel positions can be sorted freely.
You can reconfigure the analogue TV channels
	Select the optimum sound systems (broadcasting	1	Press c/dto select “Yes”, and then press ;.
settings automatically or manually.	systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).	2	Press a/b/c/dto select the channel you
E Additional search
	Label		want to move, and then press ;.
Use this menu to add new services automatically		3	Press a/b/c/dto move it to the desired

after “Analogue search” in the “Auto installation”	When a TV channel sends its network name, the		position, and then press ;.
menu has been completed.		4	Repeat steps 2 and 3 until all desired channels
	“Auto installation” detects the information and
• Start searching channels after selecting the colour
	assigns a name to it. However, you can change		are sorted.
system and sound system.
	channel names individually.	E Erase programme
E Manual adjust
	Select each character of the new name for the	Channels can be erased individually.
Use this menu to set up analogue TV channels
	channel with using the software keyboard (Page	1	Press c/dto select “Yes”, and then press ;.
manually.
	13).
After selecting “Yes” on the screen, press		2	Press a/b/c/dto select the channel you
	NOTE
a/b/c/dto select the channel you want to			want to erase, and then press ;.
	• The name can be five characters or less.
set and then press ;.			• A message window pops up.
		3
Fine	Skip		Press c/dto select “Yes”, and then press
			;to erase the selected channel. All the
You can adjust the frequency to the desired position.	Channels with “Skip” set to “On” are passed over		subsequent channels move up.
	when using :r/seven if selected while watching	4	Repeat steps 2 and 3 until all desired channels
NOTE
	the image from the TV.		are erased.
• Adjust while checking the background picture as a	Lock
reference.
• Instead of pressing c/dto adjust the frequency, you
can set by directly entering the frequency number of the	You can block the viewing of any channel.
channel with 0_9 numeric buttons.	NOTE
EXAMPLE
	• See “PIN” for setting a PIN.
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.	• When “Lock” is set to “On” for a channel, “Child lock
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.	has been activated” displays, and the image and sound
Colour sys.	of the channel are blocked.
	• When pressing 6while “Child lock has been activated”
Select the optimum colour system to receive	displays, the PIN input window will display. Inputting
	the correct PIN unlocks the “PIN” temporarily until the
(“Auto”, “PAL”, “SECAM”).	power is turned off.

Analogue setting

E Sort

Label

E Erase programme

Fine

Skip

Lock

EXAMPLE

Colour sys.

Select the optimum colour system to receive