Sharp LC-70LE835E, LC-70LE835RU, LC-70LE836E, LC-70LE836S operation manual Advanced

Basic adjustment

Picture

Advanced

This TV provides various advanced functions for optimising the picture quality.

Go to “Menu” > “Setup” > “Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour using a six-colour adjustment system.

C.M.S.-saturation

This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.

C.M.S.-value

This function adjusts the brightness of a selected colour using a six-colour adjustment system.

Colour gamut range

Adjusts the range of a subset of colour to display the image. Expanded colour gamut means more colourfulness; images become more vivid.

	Item
Standard	Standard colour gamut.
Expanded	More vivid colour with expanded
	colour gamut.

NOTE

•This function is available only when selecting “MOVIE” or “MOVIE (3D)” from the “AV mode” menu.

Colour temp.

Adjusts the colour temperature to give the best white image.

	Item
High	White with bluish tone.
Mid-High	Intermediate tone between “High”
	and “Middle”.
Middle	Natural tone.
Mid-Low	Intermediate tone between “Middle”
	and “Low”.
Low	White with reddish tone.
10 point setting*	Finely adjusts each colour
	temperature between 1 to 10
	points.
R/G/B Gain (LO),	Adjusts the white balance by
R/G/B Gain (HI)	changing the value of each item.

*“10 point setting” is available only when selecting “STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE (3D)” from the “AV mode” menu.

Scanning backlight 200

“Scanning backlight 200” technologies provide superior solutions for digital display picture quality removing motion blur (“Scan”, “High”, “Low”, “Off”).

NOTE

•This effect is greater on fast moving images.

•These functions will have no effect in the following cases.

1)The type of signal received is a PC signal.

2)An OSD is being displayed.

3)Teletext is activated.

•If images appear blurred, set to “Off”.

Sub pixel control

Reproduces high-definition images with higher resolution.

Gamma adjustment

Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e2 to a minimum of f2.

Film mode

Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality (“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).

NOTE

•You can select “Advanced”, “Standard” and “Off” in 3D mode.

Active contrast

Automatically adjusts the contrast of an image according to the scene.

DNR

“DNR” produces a clearer image (“Auto”, “High”, “Middle”, “Low”, “Off”).

NOTE

•This function may not be available depending on the input signal type.

33