Sharp LC-42LE760E, LC-50LE762E Package Contents, TV Control button & Operation, Connect Power

Package Contents

TV
LED TV	Batteries: 2 X AAA
Quick Guide	1 X Video & Audio Connection
	Cable
Remote Control
4 x 3D Glasses	Nero media home CD

Note: You should check the accessories after purchasing. Make sure that each accessory is included.

As the manufacturer’s specification supports communication on cable lengths shall be smaller than 3m.

TV Control button & Operation

1.Standby / On button

2.TV/AV button

3.Programme Up/Down buttons

4.Volume Up/Down buttons

Note: Press Volume Up/Down buttons at the same to view main menu and use Prpgramme Up/Down buttons to navigate and Volume Up/Down buttons to change value.

, switch is used for turning the TV on or off.

The position of the control buttons and power switch may differ depending on the model.

English

Connect Power

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Antenna/Cable/Satellite Connection

Connect the aerial or cable TV plug to the AERIAL INPUT (ANT.) or satellite lead to the SATELLITE INPUT(LNB) located on the rear side of the TV. “Satellite is only available in 762 series”.

Rear side of the TV:

SATELLITE

AERIAL

CABLE

Note: Satellite support is depending on the model.

(only available in LC-42LE762E / LC-42LE762EN / LC-50LE762E / LC-50LE762EN series)

Installing The Batteries Into The Remote

•Remove the back cover to reveal the battery compartment.

•Insert two size AAA batteries. Note the correct polarity(+ or -). Do not mix old and new batteries. Replace only with same or equivalent type.

•Place the cover back on.

Angle of the remote control unit

Use the remote control unit by pointing it towards the remote control sensor.

Objects between the remote control unit and sensor may prevent proper operation.

Cautions regarding the remote control unit

•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

-7 -