•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.
•The remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.
Switching On/Off
To Switch the TV On
Connect the power cord to the mains socket. Switch the “
” button on the TV to position “” so the TV will switch to standby mode. Then the standby LED lights up.
To switch on the TV from standby mode either:
•Press the “
” button, P+ / P- or a numeric button on the remote control.
•Press the “
” or P/CH+/- button on the TV.
The TV will then switch on.
To Switch the TV to Standby
To switch the TV to low power standby press the “
” button on the remote control or on the TV.
To Switch the TV Off
Switch the “
” button on bottom of the TV to
position 2 as illustrated - | , to isolate the TV from |
the mains, the LED will | go out. |