Quick guide
Before turning on the power
Standard DIN45325 plug (IEC
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV.
1Press MENU and the “MENU” screen displays.
2 Press c/d to select “Setup”.
3 Press a/b to select “Antenna
OK.
4 Press a/b to select “Supply Voltage”, and then press OK. 5 Press c/d to select “On”, and then press OK.
1Carefully insert the CI Module in the CI slot
with the contact side forward.
2 The logo on the CI Module must be facing outward from the rear of the TV.
Place the TV close to the AC outlet, and keep the power plug within reach.
AC cord
Product shape varies in some countries.
Mounting the TV on a wall
•This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 42). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
•Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
•You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
•To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
•When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5 or AN-52AG4
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting the TV on the wall.
AN-37AG5
AN-52AG4
Bundling the cables
Cable clamp
Bundle the cables with the clamp.
8