Sharp LC-52DH77E, LC-52DH77S, LC-42DH77S Menu operation, What is the MENU?, Common operations

Menu operation

What is the MENU?

•You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.

•The “MENU” enables various settings and adjustments.

•The “MENU” can be operated with the remote control unit.

Common operations

1Display the MENU

Screen

Press MENU and the “MENU” screen displays.

Picture

DYNAMIC

OPC			[Off]
Backlight	[+14]	–16	+16
Contrast	[+30]	0	+40
Brightness	[0]	–30	+30
Colour	[0]	–30	+30
Tint	[0]	–30	+30
Sharpness	[0]	–10	+10
Advanced
Reset

3Exit the MENU

screen

The operation will exit the “MENU” screen if you press END before it is completed.

NOTE

2

Select an item

Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press OK.

Press 6 to return to the previous “MENU” page.

E Selecting in the MENU

ECO

Energy Save	[Off]
No Signal Off	[Disable]
No Operation Off	[Disable]
Sleep Timer

E Selecting options

Digital Search Analogue Search

•“MENU” options differ in the selected input modes, but the operating procedures are the same.

•The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

•Items with 4 cannot be selected for various reasons.

Operation without a remote control unit About the Guide Display

This function is useful when there is no remote control unit within your reach.

1Press MENU and the “MENU”

screen displays.

2Press Pr/sinstead of a/b

or ik/l instead of c/d to select the item.

3Press bto complete the setting.

NOTE

•The “MENU” screen will disappear if left unattended for several seconds.

The Guide Display at the bottom of the screen shows operations with the OSD.

: Select OK : Enter 6 : Back MENU : End

The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen.

22