Sharp LC-46DH77E Connecting a PC, PC Audio Select, Displaying a PC image on the screen

Connecting a PC

Connecting a PC		Setting audio input
HDMI Connection		Option
PC	HDMI1, 2* or 3	PC Audio Select
HDMI-certified cable		When using the EXT4 terminal or HDMI2 terminal, you must
		select which terminal uses the AUDIO (R/L) jack for analogue
		audio input.
PC	HDMI2*	Item
		HDMI2: When connecting devices (including a PC) with DVI/HDMI
ø 3.5 mm stereo minijack cable
		cable to the HDMI2 terminal and inputting analogue audio
		signals from the AUDIO (R/L) jack.
		EXT4 (RGB): When connecting a PC to the EXT4 terminal, and
		inputting analogue audio signals from the AUDIO (R/L) jack.

DVI/HDMI cable

*When using the HDMI2 terminal, you must select the proper item in the “PC Audio Select” menu depending on the type of HDMI cable connected (Refer to the right column for details).

Analogue Connection

RGB cable

PC

EXT4*

ø3.5 mm stereo minijack cable

DVI/RGB conversion cable

PC

EXT4*

NOTE

•You must set this to “EXT4 (RGB)” when connecting devices (including a PC) with an HDMI-certified cable to the HDMI2 terminal. If “HDMI2” is set, there will be no sound output.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.

1Press f.

• The “WIDE MODE” menu displays.

2Press f or a/b to select a desired item on the menu.

NOTE

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

EXAMPLE

NormalFull

ø3.5 mm stereo minijack cable

* When using the EXT4 terminal, you must select “EXT4 (RGB)” in the “PC Audio Select” menu (Refer to the right column for details).

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 38 for a list of PC signals compatible with the TV.

•A Macintosh adaptor may be required for use with some Macintosh computers.

Item

Full: An image fully fills the screen.

Cinema: For letterbox pictures. Bars may appear on the top and bottom with some programmes.

Normal: Keeps the original aspect ratio in a full screen display.

Dot by Dot: Displays an image with the same number of pixels on the screen.

NOTE

•Refer to page 29 for AV signals (See below). HDMI: 480i/480p/576i/576p/720p/1080i/1080p ANALOGUE RGB: 576p/720p (50Hz)/1080i

•The ANALOGUE RGB terminal (PC) (EXT4) is not compatible with 480i/576i/1080p signals.

35