Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit | "AAA" size | battery | AC cord | Cable clamp | Stand unit | Operation manual |
(x 1) | (x 2) | (x 1) | (x 1) | (x 1) | (x 1) | |
Page 7 | Page | 8 | Page 7 | Page 7 | Page 6 |
|
J
Always use the AC cord supplied with the TV.
The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single
QUICK REFERENCE
o Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
o Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
o Attach the stand in the correct direction.
,Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
,Be sure to follow the instructions, incorrect instaJJation of the stand may result in the TV faJJing over.
1Confirm that there are 12 screws (all the same size) supplied with the stand unit.
???????? ????
2(_ Set the post for the stand unit onto the box. {_) Attach the base to the post.
{_} Insert and tighten the 8 screws into the 8 holes on the bottom of the base.
o Hold the stand unit securely with one hand, and then tighten the screws.
.....
I
3(_ Insert the stand into the openings on the bottom of the TV.
{_) Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
@ _
®
To detach the stand, perform the steps in reverse order.
(b