Sharp LC-46LE700 WiTH the AC Cord Connected, Bundle the cords properly with the cable clamp, @-7

QUICK REFERENCE

1Attach your antenna to the back of the television. (See page 8.)

2Connect the AC plug for the television into the AC outlet.

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

•Place the TV close to the AC outlet, and keep the power plug within reach.

3O

1T (5 m)

I

,,TO PREVENT RiSK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES

WiTH THE AC CORD CONNECTED.

3Bundle the cords properly with the cable clamp.

II Cautions regarding the remote control unit

o Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

o Do not install or place the remote control unit under direct

sunlight. The heat may cause deformation of the remote control unit.

o The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the remote control sensor.

4 How to turn on the television for the first time.

A)Press POWER on the television.

_3 -'_ POWER

B)The POWER indicator on the front of the television lights GREEN.

POWER indicator

Speakers cannot be detached from the TV. TV angle cannot be adjusted.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television.

If the POWER indicator on the television still does not light up, press TV POWER on the remote control to turn the power on.

IMPORTANT:

IFTHE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IFYOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

@-7