Sharp LC-40D78UN Auto Sync. for Analog PC Input Mode Only, HDMI Auto View, Fine Sync, Audio Setup

Page 21
Auto Sync. (for Analog PC Input Mode Only)

On-Screen Display Menu

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts.

No: This function does not work.

•When "Auto Sync." is successful, "Completed" displays. If not, "Auto Sync." failed.

•"Auto Sync." may fail even if "Completed" displays.

•"Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing "Auto Sync.".

•Be sure to connect the PC to the TV and switch it on before starting "Auto Sync.".

HDMI Auto View

To watch an HDMI or PC-IN equipment image, select "INPUT5", "INPUT6" or "INPUT7" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV.

Enable: To use View Mode based on signal recognition, including an HDMI signal.

Disable: No function.

•Refer to your external equipment operation manual for the signal type.

•When connecting a DVI-HDMI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

Clock: Adjust when the image fl ickers with vertical stripes.

Phase: Adjust when characters have low contrast or when the image fl ickers.

•For resetting all "Fine Sync." adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

•It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

•The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

PC Audio Select

Determines whether the AUDIO terminal is used for INPUT 4 (PC-IN) or INPUT 6 (HDMI).

INPUT4 (PC): Select this item when the audio signal is input via the INPUT 4 (PC-IN) terminal using an analog RGB cable (D-sub 15-pin cable or VGA cable).

INPUT6 (HDMI): Select this item when the audio signal is input via the INPUT 6 (HDMI) terminal using a DVI- HDMI conversion cable.

•When "PC Audio Select" is set to "INPUT6 (HDMI)", sound will not be produced if you use only an HDMI-certifi ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection.

•If you want to connect HDMI-compatible equipment using only an HDMI-certifi ed cable, set "PC Audio Select" to "INPUT4 (PC)".

Audio Setup

You can output digital audio to an AV amplifi er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital.

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1"Return to factory pre-setting" displays on the screen.

•If you have already set the Secret No., input the 4-digit secret number here.

2Select "Yes".

•After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

•The Channel Setup settings will not be changed.

•The Language settings will not be changed.

•The Secret number settings will not be changed.

•The TV Location settings will not be changed.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Make sure the following accessories are provided with the product Supplied AccessoriesLC-40D78UN OPERATION MANUALDECLARATION OF CONFORMITY IMPORTANT INFORMATION10P05-MX-NM Model No Serial NoFor U.S.A. only Sharp at 1-800-BE-SHARPINFORMATION IMPORTANT INFORMATIONIMPORTANT SAFETY INSTRUCTIONS Additional Safety InformationDEAR SHARP CUSTOMER Caring for the Cabinet Precautions when transporting the TVTHE ISSUE It Makes A Difference How and Where You Use Your Flat Panel DisplayTUNE INTO SAFETY Caring for the Liquid Crystal panelUsing an optional bracket to mount the TV Setting the TV on the WallQUICK REFERENCE Attaching/Detaching the StandUsing the Remote Control Unit QUICK INSTALLATION TIPS4 How to turn on the television for the fi rst time A Press POWER on the televisionNOTICE F-type connector should be finger-tightened only Installing Batteries in the Remote Control UnitConnecting Antenna Cable PreparationPOWER button MENU button INPUT button INPUT 5 terminal HDMI SERVICEPart Names TV FrontConnecting to External Equipment Connecting an Audio AmplifierConnecting a PC Initial Installation Turning On/Off the PowerWatching TV ENTERPOWER Changing VolumeYou can select 4 preset favorite channels in 4 different categories Sleep TimerExample When the input source is TV, INPUT 1, 2 or 3 terminals Allows you to gain quick access to PC mode. Press PCExample When the input source is INPUT 4, 5, 6 or 7 terminals You can enjoy Hi-Fi stereo sound or SAP broadcasts where available1 Press INPUT ⑬ INPUT1 Press CC 2 Press INPUT again or press a/b to select the input sourceVIEW MODE Input signalYou can select the screen size 1 Press VIEW MODEUse the following buttons on the remote control to operate the menu Using the remote controlUsing the control panel of the main unit MENU MENU on the remote control INPUT ENTER on the remote controlAdvanced Picture Setting OPC SettingPicture Menu On-Screen Display MenuPower control setting allows you to save energy Power Control MenuPower Saving No Signal OffEZ Setup Setup MenuYou can run EZ Setup again, even after setting up the preset channels For adjusting a pictures horizontal and vertical positionAudio Setup For automatically adjusting the PC imageReset 1 Return to factory pre-setting displays on the screenThree conditions must be met to enable the V-Chip see pages 22 to Parental CTRL Parental Control SettingYou can set and change the secret number by using Secret NoTV Parental Guidelines When setting an individual content-based rating itemCanadian English Ratings RatingCanadian French Ratings Option MenuReactivating the temporarily released V-CHIP BLOCK Audio OnlyFavorite CH Favorite Channel Setting Digital Caption SetupSoftware Update Operation Lock Out5 Press ENTER to start checking the data in the USB memory device 4 Input the 4-digit secret number by usingPress ENTER to start updating 6 During the data checking, “Checking” blinksProblem TroubleshootingPossible Solution No powerThe example of an error message Troubleshooting - Error MessageAppendix No pictureSpecifications Optional AccessoryModel LC-40D78UN Part namePC Compatibility Chart CLEARING THE SECRET NUMBERThe secret number is LIMITED WARRANTY Calling for ServiceCONSUMER LIMITED WARRANTY Warranty Period for this Product Additional Exclusions from
Top Page Image Contents