Sharp LC-40D78UN Input the 4-digit secret number by using, Press ENTER to start updating, Enter

Page 26
4 Input the 4-digit secret number by using 0–9.

On-Screen Display Menu

3 Press a/b to select “Software Update”, and then

7

press ENTER.

 

•If you have already set the Secret No., go to step 4.

4 Input the 4-digit secret number by using 0–9.

5Press ENTER to start checking the data in the USB memory device.

Insert the USB memory device containing

the software update file.

OK

Press ENTER to start updating.

•The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until the Software Update display appears.

Wait several minutes and do not unplug the AC cord.

OK

6During the data checking, “Checking” blinks.

Now checking the data in the USB memory device.

Checking

•The current version of the TV software and the version of the update fi le on the USB memory device are displayed. To update the TV software with the update fi le, select “Yes”, and then press ENTER.

Example

Software update file is detected in the USB memory device.

Start update?

Current Version:

UXXXXXX1

Update Version:

UXXXXXX2

 

 

 

Yes

 

No

•If the USB memory device is not properly installed or the correct update fi le cannot be found on the USB memory device, an error message is displayed.

•Check the fi le on the USB memory device, and then reinsert the USB memory device correctly.

Software update file is not detected

in the USB memory device.

Confirm that you have transferred the file

to the USB memory device and retry software update.

OK

There is more than one software file in the USB memory device.

Confirm that only the software update file is in the USB memory device.

OK

Example

Now updating

5Press ENTER to start checking the data in the USB memory device.Do not unplug AC cord.

Update Version

UXXXXXX2

30%

CAUTION

•Do not remove the USB memory device or unplug the AC cord while the software is being updated.

8When the software is successfully updated, a screen is displayed indicating that the update process is completed.

After this screen is displayed, the TV automatically turns off and then turns on again.

Example

Software update is complete.

Update Version

UXXXXXX2

•If the update has failed, check the fi le in the USB memory device and try Software Update again.

Failed to complete update. Retry Software Update.

If system Update fails again, contact the customer service center.

9After the screen shown below is displayed, press

ENTER.

System software was successfully updated.

Remove the USB memory device.

OK

10 Remove the USB memory device.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents LC-40D78UN Supplied AccessoriesMake sure the following accessories are provided with the product OPERATION MANUAL10P05-MX-NM IMPORTANT INFORMATIONDECLARATION OF CONFORMITY Model No Serial NoINFORMATION Sharp at 1-800-BE-SHARPFor U.S.A. only IMPORTANT INFORMATIONDEAR SHARP CUSTOMER IMPORTANT SAFETY INSTRUCTIONSAdditional Safety Information Precautions when transporting the TV Caring for the CabinetTUNE INTO SAFETY It Makes A Difference How and Where You Use Your Flat Panel DisplayTHE ISSUE Caring for the Liquid Crystal panelQUICK REFERENCE Setting the TV on the WallUsing an optional bracket to mount the TV Attaching/Detaching the Stand4 How to turn on the television for the fi rst time QUICK INSTALLATION TIPSUsing the Remote Control Unit A Press POWER on the televisionConnecting Antenna Cable Installing Batteries in the Remote Control UnitNOTICE F-type connector should be finger-tightened only PreparationPart Names INPUT 5 terminal HDMI SERVICEPOWER button MENU button INPUT button TV FrontConnecting a PC Connecting to External EquipmentConnecting an Audio Amplifier Watching TV Turning On/Off the PowerInitial Installation ENTERYou can select 4 preset favorite channels in 4 different categories Changing VolumePOWER Sleep TimerExample When the input source is INPUT 4, 5, 6 or 7 terminals Allows you to gain quick access to PC mode. Press PCExample When the input source is TV, INPUT 1, 2 or 3 terminals You can enjoy Hi-Fi stereo sound or SAP broadcasts where available1 Press CC ⑬ INPUT1 Press INPUT 2 Press INPUT again or press a/b to select the input sourceYou can select the screen size Input signalVIEW MODE 1 Press VIEW MODEUsing the control panel of the main unit Using the remote controlUse the following buttons on the remote control to operate the menu MENU MENU on the remote control INPUT ENTER on the remote controlPicture Menu OPC SettingAdvanced Picture Setting On-Screen Display MenuPower Saving Power Control MenuPower control setting allows you to save energy No Signal OffYou can run EZ Setup again, even after setting up the preset channels Setup MenuEZ Setup For adjusting a pictures horizontal and vertical positionReset For automatically adjusting the PC imageAudio Setup 1 Return to factory pre-setting displays on the screenYou can set and change the secret number by using Parental CTRL Parental Control SettingThree conditions must be met to enable the V-Chip see pages 22 to Secret NoCanadian English Ratings When setting an individual content-based rating itemTV Parental Guidelines RatingReactivating the temporarily released V-CHIP BLOCK Option MenuCanadian French Ratings Audio OnlySoftware Update Digital Caption SetupFavorite CH Favorite Channel Setting Operation Lock OutPress ENTER to start updating 4 Input the 4-digit secret number by using5 Press ENTER to start checking the data in the USB memory device 6 During the data checking, “Checking” blinksPossible Solution TroubleshootingProblem No powerAppendix Troubleshooting - Error MessageThe example of an error message No pictureModel LC-40D78UN Optional AccessorySpecifications Part nameThe secret number is PC Compatibility ChartCLEARING THE SECRET NUMBER CONSUMER LIMITED WARRANTY Calling for ServiceLIMITED WARRANTY Warranty Period for this Product Additional Exclusions from
Top Page Image Contents