Quick guide
Before turning on the power
Standard DIN45325 plug (IEC
75 q coaxial cable
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna input terminal on the back of your TV.
1.Press MENU and the menu screen displays.
2.Press c/d to select “Setup”.
3.Press a/b to select “Antenna
4.Press a/b to select “Supply Voltage”, and then press OK.
5.Press c/d to select “On”, and then press OK.
1. Carefully insert the CI Module in the CI slot with the contact side forward.
2. The logo on the CI Module must be facing forward from the rear of the TV.
Place the TV close to the AC outlet, and keep the power plug within reach.
Ferrite core* | (For Europe, except | |||||||||
| U.K. and Eire) | |||||||||
AC cord |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(For U.K. and Eire)
* Ferrite Core
The Ferrite Core should be permanently attached and never removed from the AC cord.
Setting the TV on the wall
•This TV should be mounted on the wall only with the wall mount bracket and attachment available from SHARP. (Page 39) The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
•Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
•You can ask a qualified service personnel about using an optional bracket and attachment to mount the TV to the wall.
•To use this TV mounted on a wall, first remove the adhesive tape at the 2 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
•When you mount the TV on the wall, you should attach the supporting post.
Bundling the cables
Cable clamp 
Bundle the cables with the 
clamp.
8