Sharp LC-37X20S, LC-32X20S, LC-37X20E operation manual Other useful features

Other useful features

Setting when using external devices

Input source settings

Option

Input Select

For setting the signal type of external equipment.

Item

EXT 1: Y/C, CVBS, RGB

EXT 2: Y/C, CVBS, RGB

EXT 3: Auto, S-VIDEO, VIDEO

NOTE

•If no (colour) image displays, try changing to another signal type.

•Check the operation manual of the external equipment for the signal type.

•When the signal type is set to “Auto”, the input terminal where a cable is connected is automatically selected.

Setup

Input Label

You can assign each input source a label as you prefer.

1Press b to select the desired input source.

2Go to MENU> Setup> Input Label.

3Press a/b/c/d to select each character of the new name for the input source, and then press OK.

			DVD
A B C D E					F	G	H	I	J CLEAR
K	L	M N O			P	Q	R	S	T BACK
U	V W		X	Y	Z	+	– .		_
0	1	2	3	4	5	6	7	8	9	END

4Repeat until the name is fully spelt out.

NOTE

•The name can be 6 characters or less.

•When you want to set an input source name of less than 6 characters, select “END” to set the name.

INPUT SOURCE

TV

EXT1

EXT2

EXT3

DVD

EXT5

EXT6

NOTE

• You cannot change labels if the input source is TV.

Skipping specified input

Setup

Input Skip

This setting allows you to skip the SCART, HDMI or RGB input on the “Input Select” menu.

EXT 1 (SCART)
EXT 2 (SCART)
EXT 4	(HDMI)
EXT 5	(HDMI)
EXT 6	(HDMI)	Yes	No
EXT 7	(RGB)

Colour system settings

Option

Colour System

You can change the colour system to one that is compatible with the image on the screen.

NOTE

•The factory preset value is “Auto”.

•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, SECAM).

Additional features

Setup

Standby Mode

You can reduce the TV’s start-up time after turning on the power with the remote control unit.

Item

Mode1: The TV quickly starts up from standby. 30W or more of power consumption is required.

Mode2: Power consumption is small during standby.

32