Appendix
Updating your TV via DVB-T
To ensure that your TV software version is always up to date, from time to time SHARP will make updated TV base software and DVB software available.
Digital Setup
Download Setup
Searching for updates*
*The country except UK and Sweden is set to “Yes” on this function.
The TV automatically determines whether a new software version is available when the TV is in standby mode.
Item
Yes: Search automatically if there is software available for update when the TV is in standby mode.
No: Do not search for update information.
Now: Check whether or not there is a new software immediately.
NOTE
•The TV must remain in standby mode for download. Do not switch off the TV with the main power switch.
•Updating the software may take some time.
Downloading the software
If the software is updated, the confirmation message “New download information has been detected.” appears. You can select the method of update.
1When you tune to the service that provides the update, a confirmation message displays.
2Follow the screen prompts.
Item
Yes: Start downloading immediately. It takes approximately one hour to update. You cannot carry out other operations while downloading.
No: Start downloading automatically several minutes after entering standby mode. The Timer settings will be executed.
•Cancel the download by pressing OK on the remote control when displaying “Discontinue” on the screen during the update.
Information
Message List
When software is detected in the “Download Setup” menu and “No” is selected, you can update the software from the “Message List” menu.
Press c/d to select “Yes” after confirming the message, and then press OK.
NOTE
•When the TV succeeds at downloading new software, the message is updated in the “Message List” of the “Information” menu.
•The software update will not be carried out if there is no new software available at the specified download time.
Information
Receiver Report
Display reports regarding failures and changes for timer settings.
Reset
If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values.
Setup
Reset
1Press c/d to select “Yes”, and then press OK.
•“Now, TV will restart automatically. OK?” displays on the screen.
2Press c/d to select “Yes”, and then press OK.
•“Now initialising...” displays on the screen and blinks.
•After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.
Now initialising...
Identification
Setup
Identification
You can check the TV ID on the screen for reporting to customer service.
CLEARING THE PASSWORD
1Go to MENU > Setup.
2Press a/b to select “Auto Installation”, “Programme Setup”, “Child Lock”, “Reset”, and the PIN input screen displays.
3Press and hold both CH r and VOL k on the TV simultaneously until the message appears on the screen.
38