TV menu
Source Labels
You can assign a label to each input source as you prefer in the label list.
1.Go to Installation > Source labels
2.Assign a input source and press > to select a label from label list.
3.Press B on the remote control and check the result.
Assign a channel decoder (For ATV)
Decoders that decode channels can be connected to SCART. You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected.
1.Press MENU on the remote control and select Installation > Decoder.
TV Menu
Installation | Decoder |
Language | 1 ... |
Country | 2 ... |
Channel installation | 3 ... |
Source labels
Decoder
Current software info
AV reset
Factory reset
2.Press ≥ to enter the list.
3.Press < or > to select the channel to decode.
4.Press OK to select or unselect the channel.
5.Press ≤ to return to the previous menu.
6.Press MENU to exit.
Check your current software version
Press MENU on the remote control and select
Installation > Current software info.
Update software (digital broadcasts)
If using
•Select Accept (recommended) to update the software immediately.
•Select Reject to exit the update (not recommended).
•Select Remind me later to be reminded to update the software later.
NOTE
•To scan all carriers for upgrade availability, perform the manual upgrade.
•The software upgrade may take about 30 minutes, but may take longer (up to 1 hour) depending on the signal status.
CAUTION
Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.
AV reset
To reset the Audio and Video to default settings.
1.Press MENU on the remote control and select Installation > AV reset
2.Press ≥ to select “Start now” and press OK.
3.Press MENU to exit.
Factory reset
When you activate the Factory reset , the TV needs to be reset from First time installation.
1.Press MENU on the remote control and select Installation > Factory reset
2.Press ≥ to select “Start now” and press OK.
3.Press MENU to exit.
25