TV menu
Fine tune analogue channels
You can manually fine tune analogue channels when reception is poor.
1.Press MENU on the remote control and select Installation > Channel installation > Analogue: manual installation > Fine tune.
2.Press ≥ to enter the Fine tune menu.
3.Press < or > to adjust the frequency.
4.Press ≤ when done.
5.Select Store current channel to store the fine tuned channel under the current channel number.
6.Press ≥ to enter.
7.Press OK. Done appears.
8.Press MENU to exit.
Rearrange channels
1.Press MENU on the remote control and select Installation > Channel installation > Rearrange.
2.Press ≥ to enter the Rearrange list.
3.Press < or > in the Rearrange list to select the channel you want to rearrange.
4.Press the yellow button to move the channel up the list, or press the blue button to move the channel down the list.
5.Press MENU to exit.
Rename channels
1.Press MENU on the remote control and select Installation > Channel installation > Rearrange.
2.Press ≥ to enter the Rearrange list.
3.Press < or > in the Rearrange list to select the channel you want to rename.
4.Press the red button. (Rename)
5.Press ≤ and ≥ to select characters or < and > to change the characters. Space, numbers
6.Press the green button or OK to finish.
NOTE
•Delete all characters by pressing the yellow button. Delete only the highlighted character by pressing the blue button.
Uninstall or reinstall channels
You can uninstall a stored channel or reinstall an uninstalled channel.
1.Press MENU on the remote control and select Installation > Channel installation > Rearrange.
2.Press ≥ to enter the Rearrange list.
3.Press < or > to select the channel you want to uninstall or reinstall.
4.Press the green button to uninstall or reinstall the channel.
5.Press MENU to exit.
Test digital reception
If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish.
1.Press MENU on the remote control and select Installation > Channel installation > Digital: Test reception.
2.Press OK.
3.Press the green button to automatically start the test or manually enter the frequency of the channel you want to test. If the signal quality and strength is poor, reposition the antenna or satellite dish and retest.
4.When complete, press the yellow button to store the frequency.
5.Press the red button to return to the Channel installation menu.
6.Press MENU to exit.
NOTE
•If you have further problems with the reception of your digital broadcast, contact a specialised installer.
Clear program list
You can erase the program list.
1.Press MENU on the remote control and select Installation > Channel installation > Clear program list.
2.Press MENU to exit.
24