DTV menu operations
Select
Use this function to jump to the specific service in one step. This is useful when there are many services displayed on screen to scroll through.
1 Press 
on the remote control. Now you can change the service number on the left side of the screen.
2 Enter the number using 
- 
numeric buttons, and then press OK. The highlight moves to the selected service.
Erase
Erase the selected service(s) from the memory.
1 Press a/bto select the desired service.
2 Press 
on the remote control. An icon displays indicating the service to be erased.
•Pressing 
will turn the erase icon on and off.
•Do not press END to exit the screen here if you wish to register the change.
3 Press OK.
• A confirmation message displays.
4 Press c/dto select “Yes”, and then press OK.
Auto Installation
The TV automatically detects and stores all available services in your area. See Initial auto installation (DTV) on page 8 for details.
NOTE
•If the TV detects a new carrier/service that has become available after performing “Auto Installation”, the message
“Do you want to save?” displays.
Press c/dto select “Yes” or “No”, and then press OK.
Carrier Scan
Manually add a new carrier by entering the desired carrier number or frequency band.
1
2 Press a/b to select “Carrier Scan”, and then press OK.
If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.
Carrier Scan
Channel | 35 |
|
|
Frequency (kHz) | 554000 |
|
|
Select | 0...9 | DTV MENU | OK | END |
|
|
|
|
|
Label
Change individual service names.
1 Press a/bto select the desired service.
2 Press 
on the remote control. A character set screen displays.
3 Enter new name for the service. See page 23 for operations using the character set screen.
View
Tune to the service shown in the picture window.
1 Press a/bto select the desired service.
2 Press 
on the remote control.
• The image shown in the picture window changes.
3 Press END to exit the Programme Setup screen to view the image in full screen.
3 Press a/bto select “Channel”, then c/dto enter the carrier number, and then press OK.
•The frequency of the selected carrier in the below cell changes correspondingly.
4 After the scan is complete, the screen shows all available services for the selected range.
5 A confirmation message displays. Press c/dto select “Yes”, and then press OK to save the change.
NOTE
•You can directly enter the frequency instead of step 3. In this case, select “Frequency (kHz)”, enter the number
using 
- 
numeric buttons, and then press OK. Use c/dto move between the digits.
•After performing “Carrier Scan”, the order stored by using the “Move” function will revert to the default order.
•See page 17 for setting the PIN.
Installation
This section describes how to reconfigure the DTV settings after conducting Initial auto installation (DTV) on page 8.
25