Sharp LC-32ST1E, LC-32SD1E, LC-26SD1E Setting the TV, Antenna, Ferrite Core, Bundling the cables

Quick guide

Setting the TV

Place the TV close to the AC outlet, and keep the power plug within reach.

Standard DIN45325 plug (IEC 169-2)

75-ohm coaxial cable

	Product shape
For LC-26SD1E	varies in some
	countries.

	Antenna	Ferrite Core
	Connect the antenna cable from your antenna-/
		AC cord
	cable socket or the (room-/roof) antenna for
	antenna input terminal on the back of your TV set
	to receive digitally/terrestrially broadcast stations.
		Ferrite Core
	An indoor antenna can also be used under good
	reception conditions. Passive and active room	The Ferrite Core should be permanently attached
	antennas are offered commercially. In an active	and never removed from the AC cord.
	antenna its power is supplied via the antenna
	input terminal.
	The supply voltage (5V) must be correspondingly
	set under “Supply Voltage”. (See page 18.)
Bundling the cables

Cable tie

Cable clamp

Setting the TV on the wall

•This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 35.) The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

•You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.

4