Menu operations
EEFFECTS
To select a predetermined sound effect.
✔SOUND EFFECTS
Menu Operation: SOUND Group A (page 11)
Item
BYPASS: Normal sound without sound effect.
DOLBY VIRTUAL: You can also produce “SOUND EFFECTS” from the “SOUND” setting.
1.Divide the centre signal equally between the left and right speakers to achieve a phantom centre image.
2.Process the mono surround channels (or left surround, right surround) signal via a virtualised before sending it to the left, right speakers, creating a virtualised image around the listener.
PANORAMA: This sound reproduction mode mixes all four surround decoder outputs to the left and right output channel without any loss of information and creates a surround like effect with only two speakers.
NOTE
•The “SOUND EFFECTS” menu screen can be displayed directly be pressing
Virtual.
ELEVELS
Adjust the sound quality to suit your preference.
✔SPEAKERS
Menu Operation: SOUND Group B (page 11)
■VOLUME
Adjust the volume.
Item | cButton | dButton |
VOLUME | Decrease volume | Increase volume |
|
|
|
■BALANCE
Adjust the balance.
Item | cButton | dButton |
BALANCE | Increase the | Increase the |
| volume of the left | volume of the right |
■LOUDNESS
This setting increases the volume of low and high frequency signals according to the current volume setting.
Item
OFF: To deactivate the “LOUDNESS”.
NORMAL: Keeping the amplitude of the 1 KHz reference frequency constant.
SUPERBASS: Keeping the amplitude of the 2 KHz reference frequency constant.
■AUTO VOL. (AUTO VOLUME)
Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. The Automatic Volume Correction (AUTO VOL.) solves this problem and equalizes the volume levels.
Item
ON: Set to “ON” to equalize the volume levels.
OFF: Set to “OFF” to deactivate the “AUTO VOL.”.
■DYNAMIC BASS
“DYNAMIC BASS” system extends the frequency range to create different bass effects.
Item
OFF: Set to “OFF” to deactivate the “DYNAMIC BASS”.
MEDIUM: Set to “MEDIUM”, to increase the volume of low frequency signals moderately.
STRONG: Set to “STRONG”, to increase the volume of low frequency signals exceptionally.
✔EXTERNAL
Menu Operation: SOUND Group B (page 11)
Adjust the sound level output to the external connectors to suit your preference.
■SCART VOLUME
To adjust the sound level output to the
Item | cButton | dButton |
SCART | Decrease volume | Increase volume |
VOLUME | output | output |
(EXT1) |
|
|
|
|
|
■AV VOLUME
To adjust the sound level output to the external connectors (EXT2 and AV OUTPUT).
Item | cButton | dButton |
AV VOLUME | Decrease volume | Increase volume |
(EXT2 and AV | output | output |
OUTPUT) |
|
|
|
|
|
12