Useful adjustment settings
FM Radio menu screen
You can make adjustments for FM radio broadcasting by using RADIO on the remote control.
1 Press RADIO to display the RADIO MENU screen. 2 Press a/bto select the preset radio channel.
3 Press c/dto adjust the volume.
4 Press END to exit the MENU screen.
And you can also add a new radio channel or change the preset channel settings by pressing OK.
You can display the TUNE mode by pressing Red.
WIDE MODES
You can select the display size by pressing fon the remote control.
NOTE
•“WIDE MODES” cannot be set when the FM radio mode is selected.
EManual selection
1Press f to display the “WIDE MODES” menu screen.
WIDE MODES |
|
|
|
WIDE MODES |
| NORMAL 4:3 |
|
CINEMA |
| CINEMA |
|
| ZOOM 14:9 |
| |
|
|
| |
SIZE |
| PANORAMA |
|
| FULL |
| |
|
|
| |
0 |
| AUTO |
|
POSITION |
|
|
|
0 |
|
|
|
SELECT | ADJUST | NORMAL | EXIT |
|
|
|
|
2 Press a/bto select “WIDE MODES”. And then select your desired screen size format among “NORMAL 4:3”, “CINEMA”, “ZOOM 14:9”,
“PANORAMA”, “FULL” or “AUTO” by pressing c/d.
Item
NORMAL 4:3: For 4:3 “standard” pictures. A side bar appears on each side.
CINEMA: For 16:9 broadcast cinema movies, etc. Bars may appear on the top and bottom with some programmes.
ZOOM 14:9: A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.
PANORAMA: In this mode the picture is progressively stretched toward each side of the screen.
FULL: For 16:9 squeeze pictures.
AUTO: In this mode the screen size changes automatically.
When you select “CINEMA”, “ZOOM 14:9” or “PANORAMA”, you can change the vertical “SIZE” and vertical “POSITION”.
1 Perform 1 and 2 described on the left to select “CINEMA”, “ZOOM 14:9” or “PANORAMA”.
2 Press a/bto select “SIZE” or “POSITION”. The “SIZE” or “POSITION” indicator will be displayed.
3 Press c/dto adjust the item to your desired size and position.
4 Press OK if you wish to normalize the vertical “SIZE” or vertical “POSITION”.
5 Press END to exit.
EAuto selection
Some broadcasting station send the WSS signal with information of original screen size. When the TV is in “AUTO” mode and receives the WSS signal, it changes the screen size automatically.
1 Press f on the remote control to display the “WIDE MODES” screen.
2 Press a/bto select “WIDE MODES”. And then select “AUTO” by pressing c/d.
When the TV is | The TV selects |
receiving | automatically |
|
|
WSS code 16:9 | CINEMA |
|
|
WSS code 14:9 | ZOOM 14:9 |
|
|
WSS code | PANORAMA |
NOTE
•When you are watching the TV through the external sources (EXT1 or EXT2), and it receives information of 16:9 format (through the
•In order for the “AUTO” to function correctly, the “WSS” item must be set “ON” in the “GENERAL SETUP” menu. To check it, see page 21.
25