Sharp LC-32LE530E Installation, Manual Tuning, Auto Channel Scan Retune Menu Operation

Note: You can press “MENU” button to cancel.

•After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN,please select “Yes” and than press “OK”.

• Press OK button to quit channel list and watch TV.

Installation

Press “MENU” button on the remote control and select Installation by using “” or “” button. Press OK button and the following menu screen will be displayed.

Select Automatic Channel Scan (Retune) by using “ ”/“” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select options by using “”/“” and OK buttons.

Auto Channel Scan (Retune) Menu Operation

Digital Aerial: Searches and stores aerial DVB

stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores both analogue and aerial DVB stations.

Digital Cable & Analogue: Searches and stores both analogue and cable DVB stations.

•Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“” or “” and OK button.

•After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. Press “MENU” button to cancel process. In such a case, located channels are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast entry.

•Select Manual Channel Scan from the Installation menu by using “”/“” and OK buttons. Manual Scan options screen will be displayed.

•Select the desired Search Type using “” or “

” button. Manual search options will change accordingly. Use “”/“” button to highlight an item and then press “” or “” button to set an option. You can press “MENU” button to cancel.

Digital Aerial Manual Search

In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.