Sharp LC-40SH340E operation manual Timers

After coding the correct PIN number, parental settings menu will be displayed:

Parental Settings Menu Operation

•Select an item by using “” or “” button.

•Use “” or “” button to set an item.

•Press OK button to view more options.

Menu Lock: Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the whole menu system.

Maturity Lock (optional): When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.

Child Lock (optional): When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work, except for the Standby Off/On button. When Child Lock is activated you are able to switch the TV into Standby mode with the Standby Off/On button. To switch the TV on again, you need the remote control. Hence, if one of those buttons is pressed, Child Lock Is On will be displayed on the screen when the menu screen is not visible.

Set PIN: Defines a new PIN number. Use numeric buttons to enter a new pin number. You will need to code your new pin a second time for verification purposes.

IMPORTANT: The factory default pin number is 0000, if you change the pin number make sure you write it down and keep it safe.

Note: If the Country option is set to France, you can use 4725 as the default code.

Timers

To view Timers menu, press “MENU” button and select Channel List icon by using “” or “” button. Press OK button to view Channel List menu. Use “ ” or “” button to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after a certain time.

•Highlight Sleep Timer by using “” or “” button.

•Use “” or “” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular programme using this feature.

Press “” button to set timers on an event. Programme timer function buttons will be displayed on the screen.

Adding a Timer

•Press YELLOW button on the remote control to add a timer. The following menu appears on the screen:

Network Type: This feature is unavailable to be set.

Timer Type: You can select timer type as Record or Timer.

Channel: Changes channel by using “” or “”.

Record Type: This item is unavailable to be set.

Date: Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric buttons.

End: Enter an ending time using the numeric buttons.

Duration: Displays duration between the starting and ending time.

Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use “” or “” buttons to select an option.

Change/Delete: Sets the change/delete permission.

Playback: Sets the playback permission and parental settings.

•Press GREEN button to save the timer. Press RED button to cancel.

Editing a Timer

•Select the timer you want to edit by pressing “” or “” button.

•Press GREEN button. Edit Timer menu screen will be displayed.

•When finished with editing, press GREEN button to save. You can press “MENU” button to cancel.

Deleting a Timer

•Select the timer you want to delete by pressing “ ” or “” button.

•Press RED button.

•Select YES by using “” or “” buttons to delete the timer. Select NO to cancel.

English - 29 -

A01_MB60_[GB]_1910UK_IDTV_TC_PVR_NICKEL16_40883W_YPBPR _ ROCKER_10073202_50190040.indd 29 09.09.2011 14:31:31