Recording Conﬁguration, Start Early | Sharp LC-40SH340E instruction

Recording Conﬁguration

Select Recording Conﬁguration item in the Settings menu to conﬁgure recording settings. The following menu is displayed for recording conﬁguration.

The following options are available for adjustments:

Start Early (*)

You set recording timer’s starting time to start earlier by using this setting.

(*)Available only for EU country options. End Late (*)

You set recording timer’s end time to end later by using this settings.

(*)Available only for EU country options. Max Timeshift

This setting allows you to set the maximum time allowed for timeshifting. Duration options are approximate and can change accordingly, depending on the broadcast received.

Format Disk

IMPORTANT: Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 if you activate this feature.

•If you want to delete all ﬁles on the connected USB hard disk drive or memory stick, you can use Format Disk option.

•Also, if your USB disk malfunctions, you can try formatting the USB disk. In most cases formatting the USB disk will restore normal operation; however, ALL the data stored on the USB disk will be lost in such a case.

•Press OK button while the Format Disk option is highlighted. A menu will appear on the screen, requiring you to enter a pin number. If you have not changed the pin number, the factory default is 0000.

Note: If the Country option is set to France, you can use 4725 as the default code.

After you enter the pin, a pop-up menu appears on the screen to ensure that the hard disk should be formatted, select “YES” and press OK to format the hard disk. Select “NO” and press OK to cancel. Ensure

you back up important recordings before you format the USB disk unit.

Hard Disk Info

To view the details about the USB disk, highlight Hard Disk Info by using “” or “” key and press OK. USB disk information will be displayed:

Conﬁguring Date/Time Settings

Select Date/Time in the Settings menu to conﬁgure Date/Time settings. Press OK button.

• Use “” or “” buttons to highlight Date/Time.

Date,Time,Time Settings Mode and Time Zone Setting will be available.

Use “” or “” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “” or “” buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered:

•By pressing “” or “” buttons select Time Zone.

Use “” or “” buttons to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone.

•Changes are automatically stored. Press “MENU” to exit.

English - 30 -

A01_MB60_[GB]_1910UK_IDTV_TC_PVR_NICKEL16_40883W_YPBPR	_	ROCKER_10073202_50190040.indd 30	09.09.2011 14:31:32