Sharp LC-42D83X LC-46D83X LC-52D83X operation manual Manual picture settings, Picture adjustment

Press ENTER to proceed if necessary.

3

4 Press a/b or c/d to select the desired item or adjust the item to the desired level. Press ENTER if necessary.

Press a/b to select the desired menu item.

Picture

DYNAMIC OPC

Backlight [+14]

Contrast [+30]

Brightness [ 0]

Colour [ 0]

Tint [ 0]

Sharpness [ 0] Advanced Reset

[Off]

+

+

+

+

Audio

Watching TV

Manual picture settings

Picture adjustment

You can adjust the picture to your preference. Follow the steps to adjust the picture.

1Press MENU and the MENU screen displays.

2Press c/d to select “Picture”.

MENU [Picture]

Selected item	cbutton	dbutton
OPC	Sets whether or not the screen brightness
	is automatically adjusted according to
	the lighting condition in the room. (OPC
	setting: See this page.)
Backlight	The screen dims	The screen
		brightens
Contrast	For less contrast	For more contrast
Brightness	For less brightness	For more brightness
Colour	For less colour	For more colour
	intensity	intensity
Tint	Skin tones become	Skin tones become
	purplish	greenish
Sharpness	For less sharpness	For more sharpness
Advanced	For fi ner picture adjustments. (See page
	35).
Reset	Resets all picture adjustment items to the
	factory preset values.

wOPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

Using OPC on the remote control unit

NOTE

Press OPC to switch the OPC function on and off.

Using OPC on the menu screen

•For resetting all adjustment items to factory preset values, pressa/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.

•Select “Advanced” and then press ENTER to set “Colour Temp.”, “Fine Motion Advanced”, “Film Mode”, “Active Contrast”, “3D-Y/C”, “Monochrome” or “Range of OPC”. See page 35.

Selected item	Description
On: Display	Displays the OPC effect on the screen
	while adjusting the brightness of the
	screen.
On	Automatically adjusts
Off	The brightness is fi xed at the value set in
	“Backlight” (See this page).

NOTE

•Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

34

52D83X_en_e.indd 34

2007/08/31 16:25:52