Teletext function
Teletext language setting
If Teletext information does not display correctly, perform the procedure below.
Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages listed below.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “Text Language”, and then press ENTER.
4Press a/b to select receivable teletext broadcasting language in your country.
MENU [Setup ... Text Language]
West Europe
East Europe
Greek/Turkish
Cyrillic
•West Europe — English, French, Scandinavian, Czech, German, Spanish, Italian
Displaying Subpages
You can display subpages as they are transmitted.
1Press m to display Teletext.
2Press 1 to display the subpage as shown below.
|
|
|
|
| Subpage screen |
|
| – | + |
| 184 / 0001 |
| 01 | 02 | 03 | 04 | 05 |
3 | Select the desired subpage by using CHr/ | ||||
CHs, Red or Green. | |||||
• 0 — 9 directly selects the desired subpage.
4Press 1 to exit the subpage screen.
•East Europe — Polish, French, Scandinavian, Czech, German, Slovenian/Croatian, Italian, Rumanian
•Greek/Turkish — English, French, Scandinavian, Turkish, German, Spanish, Italian, Greek
•Cyrillic — English, Russian, Estonian, Czech, German, Spanish, Ukrainian, Lettish
NOTE
•Teletext can display only when it is sent by a network. Not used to convert between languages.
Time display
You can display the time information included in the Teletext broadcast.
1Select a TV channel providing Teletext information.
(The time information is automatically captured.)
2Press DISPLAY. The channel display will appear on the display.
3Press DISPLAY again within the
4Even when you change the TV channel, you can display the time information with steps 2 to 3 above.
NOTE
• The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the
63
52D83X_en_g.indd 63
2007/08/31 16:26:39