Sharp LC-60LE822ERU operation manual Analogue setting, Fine, Colour sys, Sound sys, Label

Skip

Channels with “Skip” set to “On” are passed over when using :R/Seven if selected while watching the image from the TV.

Decoder

When connecting a decoder to the TV, you need to select “EXT 1”.

NOTE

• The factory preset value is “Off”.

Lock

You can block the viewing of any channel.

NOTE

• See “PIN” for setting a PIN.

• When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.

• When pressing 6while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “PIN” temporarily until the power is turned off.

E Sort

Channel positions can be sorted freely.

1 Press c/dto select “Yes”, and then press ;.

2 Press a/b/c/dto select the channel you want to move, and then press ;.

3 Press a/b/c/dto move it to the desired position, and then press ;.

4 Repeat steps 2 and 3 until all desired channels are sorted.

E Erase programme Channels can be erased individually.

1 Press c/dto select “Yes”, and then press ;.

2 Press a/b/c/dto select the channel you want to erase, and then press ;.

• A message window pops up.

3 Press c/dto select “Yes”, and then press ;to erase the selected channel. All the subsequent channels move up.

4 Repeat steps 2 and 3 until all desired channels are erased.

Basic adjustment

Analogue setting

You can reconfigure the analogue TV channels settings automatically or manually.

EAdditional search

Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed.

•Start searching channels after selecting the colour system and sound system.

EManual adjust

Use this menu to set up analogue TV channels manually.

After selecting “Yes” on the screen, press a/b/c/dto select the channel you want to set and then press ;.

Fine

You can adjust the frequency to the desired position.

NOTE

•Adjust while checking the background picture as a reference.

•Instead of pressing c/dto adjust the frequency, you can set by directly entering the frequency number of the channel with 0_9 numeric buttons.

EXAMPLE

•179.25 MHz: Press 1 > 7 > 9 > 2 > 5.

•49.25 MHz: Press 4 > 9 > 2 > 5 > ;.

Colour sys.

Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”).

Sound sys.

Select the optimum sound systems (broadcasting systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

Label

When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually.

1Press a/b/c/dto select each character of the new name for the channel, and then press

;.

2Repeat step 1 above until the name is fully spelt out.

NOTE

•The name can be five characters or less.

•If a channel name is less than five characters, select “END” to set the channel name.

34