Sharp LC-60LE822ERU operation manual Other useful features, Input select, Input label, Input skip

Other useful features

Setting when using external devices

Input source settings

Option

Input select

For setting the signal type of external equipment.

1Press B to select the input source for setting the input signal (“EXT 1” or “EXT 3”) from the “INPUT” menu, and then press ;.

2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.

	Item
EXT 1	Y/C, CVBS, RGB
EXT 3	COMPONENT, RGB

NOTE

•If no (colour) image displays, try changing to another signal type.

•Check the operation manual of the external equipment for the signal type.

Option

Input label

You can label each input source with a custom description.

1Press B to select the desired input source from the “INPUT” menu, and then press ;.

2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.

3Press a/b/c/dto select each character of the new name for the input source, and then press ;.

CLEAR

BACK

END

4Repeat until the label is fully spelt out.

NOTE

•The label can be six characters or less.

•When you want to set an input source label of less than six characters, select “END” to set the name.

CH list

INPUT

TV

Switchable

NOTE

• You cannot change labels if the input source is “TV” or “USB”.

Skipping specified inputs

Option

Input skip

This setting allows you to skip the SCART, HDMI, RGB, ATV, DTV or SAT input on the input source selection operation.

Go to “Menu” > “Setup” > “Option” > “Input skip”.

Setup

Terminal setting

Input skip

[Yes]

[No]

[No]

[No]

[No]

[No]

NOTE

•When you select “ATV”, “DTV” or “SAT“, the skip function works only when using the #B button on the front of the TV.

42