Sharp LC-32LE244E, LC-32LE144E Scart connection Inserting the Smartcard into CA, Module

	Connecting external devices
SCART connection	Inserting the Smartcard into CA
Example of connectable devices	module
E Decoder	In order to receive coded digital stations, a Conditional
E When using the SCART	Access module (CA module) and a Smartcard must be
	inserted into the CI (Common Interface) slot of the TV.
Full SCART, which transmits S-Video, RGB and CVBS
	The CA module and the Smartcard are not supplied
in, and CVBS tuner out.
	accessories. They are usually available from your
Decoder	dealer.
	Inserting the Smartcard into the CA module
	1. Carefully insert the CA module into the CI slot
	with the contact-side forward.
SCART cable	2. The logo on the CA module must be facing
	outward from the rear of the TV.

ENGLISH

EXT 1

SCART

NOTE

•In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input source.

Speaker / Amplifier connection

EConnecting an amplifier with digital audio input

Speaker / Amplifier		Digital audio in
	connection	(COAXIAL)

Digital audio cable

NOTE

•It takes about 30 seconds to certify the license key when you insert a Smartcard into the CI+ compatible CA module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”.

•The CI+ compatible CA module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use the power button during upgrading.

•The CI+ compatible CA module does not allow you to output any copy protected programmes using monitor out.

•If the TV displays an update confirmation message for the Smartcard while receiving CI+ compatible broadcasts, follow the screen prompts.

•Make sure that the CA module is properly inserted.

DIGITAL

AUDIO

OUTPUT

- 25

SHARP_LE144E_Rev1_GB_English.indd 25 2012/09/13 17:44:15