Appendix
Troubleshooting
Problem | Possible Solution | |
No picture | 1. | Connect power cord correctly. |
| 2. | Turn on power. |
| 3. | Connect signal cable correctly. |
| 4. | Press any button on the LCD TV. |
|
| |
Abnormal colours | Connect signal cable correctly. | |
Twisted picture | 1. | Connect signal cable correctly. |
| 2. | Please use compatible signal. |
|
| |
Picture too dark | Adjust brightness and contrast. | |
Audio only, no images | 1. | Please check if input signal is connected correctly. |
| 2. | |
|
|
|
Picture only, no audio | 1. | Connect signal cable correctly. |
| 2. | Adjust volume to proper level. |
| 3. | Connect audio signal cable correctly. |
| 4. | |
Cannot use remote control | 1. | Please change battery. |
| 2. | Turn off power for 10 seconds; and then restart power. |
|
| |
Cannot receive sufficient channels | Please use the Channel Scan function to increase the number of channels | |
through antenna | not included in memory. | |
|
| |
No colour | Please adjust the colour setup. | |
Blinking picture accompanied by | 1. | Check the connection of antenna/signal cable. |
ghost image | 2. | Check if channel is in play mode. |
| ||
| 3. | Press signal source and change input mode. |
|
| |
Broken lines or segments | Adjust antenna. | |
| Keep the TV away from noise sources, such as automobiles, neon lights, | |
| and hair dryers. | |
Certain TV channels are blocked | Please use the Update Scan method to add the channels not included in | |
(Hope to acquire some channels) | memory. | |
Overlapping images or ghost images | Please use | |
| (If your TV is subject to the influence of nearby mountains or buildings). | |
|
| |
Cannot use a function | If the item you choose turns gray, that item cannot be selected. | |
Cannot receive programmes | Please use the Update Scan method to add the channels not included in | |
| memory. | |
- 27
ENGLISH
SHARP_LE144E_Rev1_GB_English.indd 27 | 2012/09/13 17:44:25 |