Sharp LC-26D44E Auto Vol, Power Control menu, No Signal Off, No Operation Off, Power Management

Page 17
If you have already set the PIN under “Child Lock”, enter it here.
• See page 17 for setting PIN.
4 Press c/d to select “Yes”, and then press OK.
5 You can set language and country the same as in the initial auto installation. Follow steps 1 and 2 on page 8.
Press c/d to select “Setup”.
Press MENU and the MENU screen displays.
1
2
3 Press a/b to select “Auto Installation”, and then press OK.
You can run Auto Installation again, even after setting up the preset channels.

Menu operations

Surround

Menu Operation: A (page 12)

Surround function allows you to enjoy realistic “live” sound.

NOTE

You can also choose surround effects by pressing SURROUND on the remote control unit.

Auto Vol.

TV/DTV/AV only

Menu Operation: A (page 12)

Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. The Automatic Volume Control (Auto Vol.) solves this problem and equalises the volume levels.

Clear Voice

Menu Operation: A (page 12)

This function emphasises speech voice against the background noise for more intelligibility. It is not recommended for music sources.

Power Control menu

MENU [Power Control]

Power Control

Setup

No Signal Off

[Disable]

No Operation Off

[Disable]

 

 

No Signal Off

TV/AV only

 

 

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter the standby mode if there is no signal input for 15 minutes.

Five minutes before the TV enters standby mode, the remaining time displays every minute.

NOTE

When a TV programme finishes, this function may not operate.

This function is not available in DTV mode.

No Operation Off

TV/DTV/AV only

 

 

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter the standby mode if no operations are performed for 3 hours.

Five minutes before the TV enters standby mode, the remaining time displays every minute.

Power Management

PC only

 

 

Menu Operation: A (page 12)

When set, the TV will automatically enter the standby mode.

Item

Off: • No power management

• Factory preset value.

Mode1: • If there is no signal input for 8 minutes, the

TV enters the standby mode.

Even if you start using the PC and the signal inputs again, the TV stays in standby mode.

The TV turns on again by pressing a on the TV or B on the remote control unit.

(See page 8.)

Mode2: • If there is no signal input for 8 seconds, the TV enters the standby mode.

When you start using the PC and the signal inputs again, the TV turns on.

The TV turns on again by pressing a on the TV or B on the remote control unit. (See page 8.)

Setup menu

MENU [Setup]

Setup

Option

Auto Installation

 

Programme Setup

 

Child Lock

 

Position

 

WSS

[On]

4:3 Mode

[Panorama]

Language

[English]

Supply Voltage

[Off (0V)]

 

 

Auto Installation

TV only

 

 

15

Image 17
Contents LC-26D44E LC-26D44S Blue Neutral Brown Live Special Note for Users in the U.KContents Precautions when transporting the TV Important Safety PrecautionsDear Sharp customer TrademarksQuick guide Supplied accessoriesAttaching the stand Screws m9Setting the TV on the wall Setting the TVAntenna Bundling the cablesInserting the batteries Using the remote control unitEUsing 2 on the remote control unit Remote control unitDTV mode Analogue TV modeTV Rear view TV Front viewStandby mode Turning on the powerInitial auto installation Analogue Using the analogue programme listConnecting a VCR Using external equipmentConnecting a DVD player Connecting a game console or camcorderUsing AV Link function Connecting a decoderConnecting a PC Menu operations Operation without a remote controlMenu operation buttons On-Screen DisplayMenu operations Common operationsMenu Operation a Menu Operation BPicture adjustments AV ModeAdjustment items Picture menuAudio menu Audio adjustmentsAdvanced No Signal Off Power Control menuPower Management Setup menuManual Adjust Programme SetupYou can adjust the frequency to your desired position Auto SearchInput Label Child LockPosition XGA ModeMode Fine SyncDNR Digital Noise Reduction TV/DTV/AV only Hdmi SetupInput Select Colour SystemMode menu Useful featuresManual Selection Auto SelectionTeletext function Still imageDTV menu operation buttons DTV menu operationsDTV On-Screen Display DTV common operationsDTV menu operations About using the character set screenLanguage Move To DTV menu operations FavouriteLock SkipCarrier Scan InstallationAuto Installation System Setup Carrier SetupOSD Setup Configure On-Screen Display and Child Lock settingsSoftware Upgrade AccessoriesChild Lock Software VersionInserting a CA card Supplying power to the antennaCommon Interface Using the EPG Useful features DTVUsing the EPG Timer About EPGUsing the digital programme list Using the ESGViewing a service banner Useful features DTVUsing the MHEG5 application UK only Using the multi audio functionDisplaying subtitles Sample MHEG5 screenAppendix TroubleshootingProblem Possible Solution Appendix PC compatibility chartRS-232C port specifications Rating table for Child Lock Appendix CommandsUniversal RatedOptional accessory SpecificationsInformation on Disposal for Business Users European Union Other Countries outside the EULC-26D44E/LC-26D44S Polígono Industrial Can Sant Joan Calle Sena s/n Sharp Corporation

LC-26D44S, LC-26D44E specifications

The Sharp LC-26D44E and LC-26D44S are a pair of compact flat-screen LCD TVs that exemplify quality and convenience in home entertainment. With a 26-inch display size, these models are perfectly suited for smaller living spaces, bedrooms, or as secondary televisions for gaming or streaming purposes.

One of the main features of the LC-26D44E and LC-26D44S is the inclusion of Sharp's advanced LCD technology, which delivers vibrant picture quality and consistent brightness levels. The panel offers a native resolution of 1366 x 768 pixels, allowing for excellent clarity and detail in HD content. This resolution is ideal for viewing standard DVDs and broadcasts, ensuring that images appear sharp without pixelation.

Both models support a wide color gamut, enabling a richer and more immersive viewing experience. They boast a dynamic contrast ratio that enhances the differences between light and dark scenes, making television shows and movies more visually engaging. Additionally, these TVs are equipped with a fast response time, essential for reducing motion blur during fast-paced action scenes or sports broadcasts.

Connectivity options are another highlight of the LC-26D44E and LC-26D44S. They come with multiple HDMI ports that allow for seamless connection to various devices such as gaming consoles, Blu-ray players, and streaming devices. An integrated USB port also enables users to play back multimedia content directly from flash drives, further enhancing the versatility of these TVs.

Audio performance in the LC-26D44E and LC-26D44S is aided by a built-in audio enhancement system. The sound systems provide decent output, making dialogues clearer and enriching the overall sound experience. However, some users may prefer to connect external speakers or soundbars for an amplified audio experience.

Energy efficiency is an important characteristic of these models. They are designed to consume less power than older models, contributing to lower electricity bills and promoting eco-friendly usage. This makes the LC-26D44E and LC-26D44S not only functional but also a responsible choice for the environmentally conscious consumer.

In summary, the Sharp LC-26D44E and LC-26D44S are excellent choices for those looking for a compact TV that delivers strong performance, vibrant visuals, and easy connectivity. Their user-friendly features and solid build quality make them a reliable addition to any entertainment setup.