Sharp LC-26D44E, LC-26D44S operation manual Child Lock, Input Label

Page 19

Menu operations

Lock

You can block the viewing of any channel.

NOTE

•See “Child Lock” for setting PIN.

•When Lock is set to “On” for a channel, “Child lock has been activated.” displays, and the image and sound of the channel are blocked.

•When pressing OK while “Child lock has been activated.” displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off.

Sort

Channel positions can be sorted freely.

1Repeat steps 1 to 4 in Programme Setup.

2Press c/d to select “Yes”, and then press OK.

3Press a/b/c/d to select the channel you want to move, and then press OK.

4Press a/b/c/d to move it to the desired position, and then press OK.

5Repeat steps 3 and 4 until all desired channels are sorted.

Erase Programme

An individual programme can be erased.

1Repeat steps 1 to 4 in Programme Setup.

2Press c/d to select “Yes”, and then press OK.

3Press a/b/c/d to select the channel you want to erase, and then press OK.

• A message screen pops up.

4Press c/d to select “Yes”, and then press OK to erase the selected programme. All the subsequent programmes move up.

5Repeat steps 3 and 4 until all desired channels are erased.

Child Lock

TV only

 

 

Allows you to use a PIN to protect certain settings from being accidentally changed.

Changing the PIN

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Child Lock”, and then press OK.

Change PIN

Reset

New PIN

 

 

 

 

–

–

–

–

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reconfirm

–

–

–

–

 

 

 

 

 

 

 

 

 

 

4Enter the 4-digit number as a PIN using 0 – 9.

5Enter the same 4-digit number as in step 4 to confirm.

•“The system PIN has been changed successfully” displays.

NOTE

•To view a locked channel, you must enter a PIN. (See this page and page 27 for locking channels from viewing in analogue TV and DTV mode.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window.

Resetting the PIN

Allow you to reset your PIN to the factory preset “1234”.

1Repeat steps 1 to 3 in Changing the PIN.

2Enter the PIN.

3Press a/b to select “Reset”, and then press OK.

4Press c/d to select “Yes”, and then press OK.

NOTE

•As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.

•See page 32 for resetting the current PIN to the factory preset “1234” if you lose or forget your PIN.

Input Label

You can assign each input source a label you like.

1Press b to select the desired input source.

2Press MENU and the MENU screen displays.

3Press c/d to select “Setup”.

4Press a/b to select “Input Label”, and then press OK.

5Press a/b/c/d to select each character of the new name for the input source, and then press OK.

6Repeat step 5 above until the name is fully spelt out, and then press OK.

•The name can be 6 characters or less.

•If a label name is less than 6 characters, select “END”, then press OK.

NOTE

•You cannot change the label if the input source is TV or DTV.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents LC-26D44E LC-26D44S Blue Neutral Brown Live Special Note for Users in the U.KContents Trademarks Important Safety PrecautionsPrecautions when transporting the TV Dear Sharp customerScrews m9 Supplied accessoriesQuick guide Attaching the standBundling the cables Setting the TVSetting the TV on the wall AntennaInserting the batteries Using the remote control unitAnalogue TV mode Remote control unitEUsing 2 on the remote control unit DTV modeTV Rear view TV Front viewUsing the analogue programme list Turning on the powerStandby mode Initial auto installation AnalogueConnecting a game console or camcorder Using external equipmentConnecting a VCR Connecting a DVD playerConnecting a PC Connecting a decoderUsing AV Link function On-Screen Display Operation without a remote controlMenu operations Menu operation buttonsMenu Operation B Common operationsMenu operations Menu Operation aPicture menu AV ModePicture adjustments Adjustment itemsAdvanced Audio adjustmentsAudio menu Setup menu Power Control menuNo Signal Off Power ManagementAuto Search Programme SetupManual Adjust You can adjust the frequency to your desired positionInput Label Child LockFine Sync XGA ModePosition ModeColour System Hdmi SetupDNR Digital Noise Reduction TV/DTV/AV only Input SelectAuto Selection Useful featuresMode menu Manual SelectionTeletext function Still imageDTV common operations DTV menu operationsDTV menu operation buttons DTV On-Screen DisplayLanguage About using the character set screenDTV menu operations Skip DTV menu operations FavouriteMove To LockAuto Installation InstallationCarrier Scan Configure On-Screen Display and Child Lock settings Carrier SetupSystem Setup OSD SetupSoftware Version AccessoriesSoftware Upgrade Child LockCommon Interface Supplying power to the antennaInserting a CA card About EPG Useful features DTVUsing the EPG Using the EPG TimerUseful features DTV Using the ESGUsing the digital programme list Viewing a service bannerSample MHEG5 screen Using the multi audio functionUsing the MHEG5 application UK only Displaying subtitlesProblem Possible Solution TroubleshootingAppendix RS-232C port specifications PC compatibility chartAppendix Rated Appendix CommandsRating table for Child Lock UniversalOptional accessory SpecificationsInformation on Disposal for Business Users European Union Other Countries outside the EULC-26D44E/LC-26D44S Polígono Industrial Can Sant Joan Calle Sena s/n Sharp Corporation

LC-26D44S, LC-26D44E specifications

The Sharp LC-26D44E and LC-26D44S are a pair of compact flat-screen LCD TVs that exemplify quality and convenience in home entertainment. With a 26-inch display size, these models are perfectly suited for smaller living spaces, bedrooms, or as secondary televisions for gaming or streaming purposes.

One of the main features of the LC-26D44E and LC-26D44S is the inclusion of Sharp's advanced LCD technology, which delivers vibrant picture quality and consistent brightness levels. The panel offers a native resolution of 1366 x 768 pixels, allowing for excellent clarity and detail in HD content. This resolution is ideal for viewing standard DVDs and broadcasts, ensuring that images appear sharp without pixelation.

Both models support a wide color gamut, enabling a richer and more immersive viewing experience. They boast a dynamic contrast ratio that enhances the differences between light and dark scenes, making television shows and movies more visually engaging. Additionally, these TVs are equipped with a fast response time, essential for reducing motion blur during fast-paced action scenes or sports broadcasts.

Connectivity options are another highlight of the LC-26D44E and LC-26D44S. They come with multiple HDMI ports that allow for seamless connection to various devices such as gaming consoles, Blu-ray players, and streaming devices. An integrated USB port also enables users to play back multimedia content directly from flash drives, further enhancing the versatility of these TVs.

Audio performance in the LC-26D44E and LC-26D44S is aided by a built-in audio enhancement system. The sound systems provide decent output, making dialogues clearer and enriching the overall sound experience. However, some users may prefer to connect external speakers or soundbars for an amplified audio experience.

Energy efficiency is an important characteristic of these models. They are designed to consume less power than older models, contributing to lower electricity bills and promoting eco-friendly usage. This makes the LC-26D44E and LC-26D44S not only functional but also a responsible choice for the environmentally conscious consumer.

In summary, the Sharp LC-26D44E and LC-26D44S are excellent choices for those looking for a compact TV that delivers strong performance, vibrant visuals, and easy connectivity. Their user-friendly features and solid build quality make them a reliable addition to any entertainment setup.
Top Page Image Contents