Sharp LC-26D44S, LC-26D44E operation manual DTV menu operations Favourite, Move To, Lock, Skip

Page 26

DTV menu operations

Favourite

Assign services to 4 different favourite groups.

1Press a/b to select the desired service.

2Press on the remote control. A selection box displays.

3Press a/b to register the selected service to any of the 4 favourite groups (None, Fav 1 ...

Fav 4) and then press OK. An icon displays indicating the favourite status.

•Do not press END to exit the screen here if you wish to register the change.

4Press OK.

5Now you can easily select your favourite service from the Programme List. (See page 30.)

NOTE

•You cannot register the same service to two different favourite groups.

Move To

Use this function to change the position of two selected services.

1Press a/b to select the desired service.

2Press on the remote control.

3Enter the number you want to change to using

- numeric buttons, and then press OK. The positions of the selected services are switched.

•Do not press END to exit the screen here if you wish to register the change.

•You cannot enter a service number that is not listed.

4Press OK again, the message “Successfully updated” displays. The change is now registered.

001

ZDF

 

001

RTL

002

ARD

s

002

ARD

003

SAT. 1

003

SAT. 1

004

RTL

 

004

ZDF

Lock

When the service is locked, you must enter your PIN whenever you tune to the service.

1Press a/b to select the desired service.

2Press on the remote control.

If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.

An icon displays indicating the service is locked.

•Pressing will turn the lock icon on and off. (PIN entry is required when lifting the lock icon.)

•Do not press END to exit the screen here if you wish to register the change.

3Press OK.

NOTE

• See page 17 for setting the PIN.

Skip

Services that are set to skip will not be picked up when pressing P (r/s).

1Press a/b to select the desired service.

2Press on the remote control. An icon displays indicating the service to be skipped.

•Pressing will turn the skip icon on and off.

•Do not press END to exit the screen here if you wish to register the change.

3Press OK.

NOTE

•To view services that are set to be skipped, use - numeric buttons or select from the Programme List.

Move

Sort the order of the selected service by moving the service position.

1

2

Press a/b to select the desired service.

Press on the remote control. An icon displays indicating the service to be moved.

• Pressing will turn the move icon on and off.

3Move the selected service to the desired position using a/b, and then press OK.

•Do not press END to exit the screen here if you wish to register the change.

4Press OK to register the change.

EXAMPLE:

Moving “002 ZDF” ahead of “001 ARD”.

Default order: Press a/b to select the desired service in 001rs002rs003rs004.

Sorted order: Press a/b to select the desired service in 002rs001rs003rs004.

001

ARD

 

002

ZDF

002

ZDF

s

001

ARD

003

SAT. 1

003

SAT. 1

004

RTL

 

004

RTL

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents LC-26D44E LC-26D44S Special Note for Users in the U.K Blue Neutral Brown LiveContents Dear Sharp customer Important Safety PrecautionsPrecautions when transporting the TV TrademarksAttaching the stand Supplied accessoriesQuick guide Screws m9Antenna Setting the TVSetting the TV on the wall Bundling the cablesUsing the remote control unit Inserting the batteriesDTV mode Remote control unitEUsing 2 on the remote control unit Analogue TV modeTV Front view TV Rear viewInitial auto installation Analogue Turning on the powerStandby mode Using the analogue programme listConnecting a DVD player Using external equipmentConnecting a VCR Connecting a game console or camcorderUsing AV Link function Connecting a decoderConnecting a PC Menu operation buttons Operation without a remote controlMenu operations On-Screen DisplayMenu Operation a Common operationsMenu operations Menu Operation BAdjustment items AV ModePicture adjustments Picture menuAudio menu Audio adjustmentsAdvanced Power Management Power Control menuNo Signal Off Setup menuYou can adjust the frequency to your desired position Programme SetupManual Adjust Auto SearchChild Lock Input LabelMode XGA ModePosition Fine SyncInput Select Hdmi SetupDNR Digital Noise Reduction TV/DTV/AV only Colour SystemManual Selection Useful featuresMode menu Auto SelectionStill image Teletext functionDTV On-Screen Display DTV menu operationsDTV menu operation buttons DTV common operationsDTV menu operations About using the character set screenLanguage Lock DTV menu operations FavouriteMove To SkipCarrier Scan InstallationAuto Installation OSD Setup Carrier SetupSystem Setup Configure On-Screen Display and Child Lock settingsChild Lock AccessoriesSoftware Upgrade Software VersionInserting a CA card Supplying power to the antennaCommon Interface Using the EPG Timer Useful features DTVUsing the EPG About EPGViewing a service banner Using the ESGUsing the digital programme list Useful features DTVDisplaying subtitles Using the multi audio functionUsing the MHEG5 application UK only Sample MHEG5 screenAppendix TroubleshootingProblem Possible Solution Appendix PC compatibility chartRS-232C port specifications Universal Appendix CommandsRating table for Child Lock RatedSpecifications Optional accessoryOther Countries outside the EU Information on Disposal for Business Users European UnionLC-26D44E/LC-26D44S Sharp Corporation Polígono Industrial Can Sant Joan Calle Sena s/n

LC-26D44S, LC-26D44E specifications

The Sharp LC-26D44E and LC-26D44S are a pair of compact flat-screen LCD TVs that exemplify quality and convenience in home entertainment. With a 26-inch display size, these models are perfectly suited for smaller living spaces, bedrooms, or as secondary televisions for gaming or streaming purposes.

One of the main features of the LC-26D44E and LC-26D44S is the inclusion of Sharp's advanced LCD technology, which delivers vibrant picture quality and consistent brightness levels. The panel offers a native resolution of 1366 x 768 pixels, allowing for excellent clarity and detail in HD content. This resolution is ideal for viewing standard DVDs and broadcasts, ensuring that images appear sharp without pixelation.

Both models support a wide color gamut, enabling a richer and more immersive viewing experience. They boast a dynamic contrast ratio that enhances the differences between light and dark scenes, making television shows and movies more visually engaging. Additionally, these TVs are equipped with a fast response time, essential for reducing motion blur during fast-paced action scenes or sports broadcasts.

Connectivity options are another highlight of the LC-26D44E and LC-26D44S. They come with multiple HDMI ports that allow for seamless connection to various devices such as gaming consoles, Blu-ray players, and streaming devices. An integrated USB port also enables users to play back multimedia content directly from flash drives, further enhancing the versatility of these TVs.

Audio performance in the LC-26D44E and LC-26D44S is aided by a built-in audio enhancement system. The sound systems provide decent output, making dialogues clearer and enriching the overall sound experience. However, some users may prefer to connect external speakers or soundbars for an amplified audio experience.

Energy efficiency is an important characteristic of these models. They are designed to consume less power than older models, contributing to lower electricity bills and promoting eco-friendly usage. This makes the LC-26D44E and LC-26D44S not only functional but also a responsible choice for the environmentally conscious consumer.

In summary, the Sharp LC-26D44E and LC-26D44S are excellent choices for those looking for a compact TV that delivers strong performance, vibrant visuals, and easy connectivity. Their user-friendly features and solid build quality make them a reliable addition to any entertainment setup.
Top Page Image Contents