On-Screen Display Menu
Power Control
Power Saving
This function allows you to set the Power Saving level
Power control setting allows you to save energy.
Example
Power Menu
Control
Power Control
Audio Only
Power Saving
[
Standard]
No Signal Off
[Enable]
No Operation Off
[Disable]
in order to decrease the power consumption and increase the backlight lifespan.
Standard: Optimizes power reduction based upon video content. When set to "Standard", "
" appears on the screen.
Advanced: Optimizes power reduction based upon video content and engages OPC. When set to "Advanced", "
" appears on the screen.
Off: This function does not work.
•"Power Saving" does not function when you set AV MODE to "AUTO" or "DYNAMIC (Fixed)".
•You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV Modes will automatically change.
•When "Power Saving" is set to "Standard" or "Advanced", the Power Saving leaf icon appears to the left of "OPC" in the Picture Settings menu screen.
•You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 22.)
No Signal Off
1Press MENU to display the MENU screen, and then press c/d to select "Power Control".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
•Skip this step for "Audio Only".
•For resetting "No Signal Off" and "No Operation Off" to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press
ENTER.
This function allows the TV to automatically shut the power down when there is no signal received.
Enable: The power will automatically shut down if there is no signal for 15 minutes.
Disable: This function does not work.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•When a TV program fi nishes, this function may not operate.
No Operation Off
This function allows the TV to automatically shut the power down when there is no operation.
Enable: The power will automatically shut down if there is no operation for 3 hours.
Disable: This function does not work.
Audio Only
When listening to music from a music program, you can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
•The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE) is pressed.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
30