Presetting the Channels Manual | Sharp LC-20SH4X specification

Preset (Continued)

Presetting the Channels (MANUAL)

■Setting a channel to a desired TV station Upper control panel

1, 2, 6

1 Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen.

Sound system

AUTO(B/G)

VHF 1 48.25MHZ

2 Press MENU (PRESET-1) to display the MANUAL mode screen.

• Press MENU (PRESET-1) again to change the MANUAL mode as shown below.

AUTO MANUAL LANGUAGE NORMAL SCREEN

3 Select the channel position using Channel Select or

CH ( )/( ).

MANUAL(B/G)

VHF

48.25MHZ

4 Press VOL (–)/(+)to locate the channel you want to preset to the position. Search is initiated and when a TV signal is received during the search, the search stops.

5 Repeat steps 3 and 4 above, to preset the channel positions for other broadcasts, etc.

MANUAL(B/G)

UHF 5 623.25MHZ

6 Press MENU (PRESET-1) twice to return to the normal screen.

NOTE

•System may not have been set correctly, if noise can be heard or if there is no sound. In such a case, adjust “SOUND SYSTEM”. (See page 12.)

■In a weak reception area or under bad reception conditions

Upper control panel

1, 2, 3, 5

1	Press MENU (PRESET-1) on the upper part of the
	LCD TV set for more than 2 seconds to display the
	AUTO mode screen.

2	Press MENU (PRESET-1) to display the MANUAL
	mode screen.

3	While the MANUAL mode screen is displayed, press
	MENU (PRESET-1) for more than 2 seconds.
4	The channel position number remains in green.
4	Adjust for good reception using VOL (–)/(+).

5	After finishing the adjustment, press MENU
	(PRESET-1) to continue channel presetting.

NOTE

•While the MANUAL mode screen is displayed, press MENU (PRESET-1).

(The LANGUAGE mode screen will appear.)

MANUAL(B/G)

VHF 1 48.25MHZ

Press MENU for more than

2 seconds.

FINE

UHF 5 623.25MHZ

E N G L I S H

Preset (Continued)