Sharp LC-20SH4X Colour System Only INPUT2 Mode Colour Temperature, Selected item Press

Basic Adjustment Settings (Continued)

COLOUR SYSTEM (Only INPUT2 Mode)	Colour Temperature
Set the system to “AUTO” for normal reception. The “AUTO”	Adjust the colour temperature to give a better white balance.
mode automatically detects the receiving signal system and
changes the reception system of the set. When the picture or
sound is not stable, switching to an appropriate system may
improve the picture or sound quality.

1 Press MENU to display the Menu screen.

• The Picture Menu screen can be displayed directly by pressing Red.

1 Press MENU to display the Menu screen.

•The Picture Menu screen can be displayed directly by pressing Red.

2 Press \/to select “PICTURE”.

3 Press '/" to select “COLOUR SYSTEM”, and press

OK.

4 Press '/"/\/to select “AUTO”, “PAL”, “SECAM”, “N358”, “N443” or “PAL60” and press OK.

A U T O P A L 6 0

P A L

S E C A M

N 3 5 8

N 4 4 3

5 Press MENU to exit.

NOTE

•“COLOUR SYSTEM” is available only in the INPUT2 mode.

2	Press \/to select “PICTURE”.
3	Press '/" to select “ADVANCED”, and press OK.
4	Press '/" to select “COLOUR TEMP.”, and press OK.
		C O L O U R T E M P .
		R E D	[	0	]	–	+
		G R E E N	[	0	]	–	+
		B L U E	[	0	]	–	+
		R E S E T

5 Press '/" to select the desired item, and press OK.

U S E R

H I G H

M I D D L E

L O W

6 Press MENU to exit.

Selected item	Description
USER	Can set your desired colour*
HIGH	White with Bluish tone
MIDDLE
LOW	White with Reddish tone

* When you select “USER”, the following items are adjustable.

Selected item	Press \	Press
RED	Weaker red	Stronger red
GREEN	Weaker green	Stronger green
BLUE	Weaker blue	Stronger blue

NOTE

•When resetting “RED”, “GREEN” and “BLUE” to factory preset values, perform the following procedure.

1Press '/" to select “RESET” in the “ADVANCED” menu, and press OK.

2Press '/" to select “YES”, and press OK.

16