Installation
nDisassembling the stand
1.Remove the bottom cover.
Push the tabs in towards the center and pull.
Tabs
Bottom cover
2.Remove the back from the front.
Depress the button on the front and slide the back across, then pull the back up.
Horizontal position
Place the monitor on a table or other level surface.
Caution
•When using the monitor horizontally, use the horizontal tab in the upright position.
1. Lift up the two tabs on the back of the monitor.
Button 
Back
Front 
2. Place the monitor where you want to use it.
Pen writing position
Place the monitor at an angle on a table or other level surface.
1. Hold the flap by the depression on the back of the monitor and pull the flap up.
Caution
• Do not exert a large amount of force on the monitor from above. Doing so may damage the tabs.
Depression
2. Place the monitor where you want to use it.
Caution
•Do not exert a large amount of force on the monitor from above. Doing so may damage the flap.
E12