Sharp LL-S201A, LLS201A operation manual Contents, Supplied Components, System Requirements

Contents

IMPORTANT INFORMATION	3
DEAR SHARP CUSTOMER	4
SAFETY PRECAUTIONS	4
TIPS AND SAFETY INSTRUCTIONS	6
Supplied Components	7
System Requirements	7
Part Names	8
Binding Cables	9
Connecting Peripheral Equipment	9
Connection with a PC	9
Connecting headphones (commercially available)	10
Connecting the monitor to a power source	10
Installation	11
Standing position	11
Pen writing position	12
Horizontal position	12

Turning Power On/Off	13
Turning on the power	13
Turning off the power	13
Touch Action	14
Touch action modes	14
Touch action	14
Other functions	16
Cautionary points	16
Monitor Settings	17
Menu operations	17
Menu functions	18
SETUP Menu Details	19
Prohibiting operations (operation lock)	20
Monitor status indicators	21
Troubleshooting	22
Specifications	23

For information on the Pen Software, see the Pen Software Operation Manual.

Supplied Components

If any component should be missing, please contact your dealer.

 Liquid Crystal Display Monitor: 1	 AC adapter: 1
 Power cord	 USB cable (USB-microUSB Type B): 1
 CD-ROM (Utility Disk): 1	 Stand (front, back, bottom cover, fixing screws: 2): 1
 Setup Manual: 1
 Touch pen: 1

*SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*Keep packaging for use when transporting monitor, etc.

System Requirements

nTouch Panel

To use the touch panel, the monitor must be connected to a computer using a USB cable.

Touch panel operating conditions are as described below.

Computer	PC/AT compatible computer with a USB 1.1 port and able to output a resolution of 1920 x 1080.
OS	Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or
	64-bit version), Windows XP (32-bit or 64-bit version)

•Windows 7 or later is recommended for touch action.

•On Windows 7 and later, the touch panel operates with the standard Window driver. On Windows Vista/XP, you must install the touch panel driver to your PC from the included CD-ROM.

nPen Software

Operating conditions for the included Pen Software are as described below. To install Pen Software, refer to the Pen Software Operation Manual. Pen Software is for use with monitors installed in landscape orientation.

Computer	PC/AT compatible computer able to output a resolution of 1920 x 1080.
	(CD-ROM drive required for software installation.)
OS	Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or
	64-bit version), Windows XP (32-bit or 64-bit version)
CPU	Intel Celeron or AMD Sempron 1.6 GHz or faster
	Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
Memory	At least 2 GB (at least 1 GB for Windows XP)
Free space on hard drive	At least 100 MB (free space separately required for data storage)

7 E