Turning Power On/Off
Turning on the power
1. Press the POWER button.
POWER button
|
|
| Press |
|
|
| |
|
|
|
|
|
| Power LED | |
| The power LED turns on. |
|
|
2. Turn on the PC. |
|
| |
| The screen appears. |
|
|
|
|
| |
| Status | Status of the monitor | |
| Green lit | Signal input | |
|
|
| |
| Orange lit | No signal input | |
Caution
•When switching the POWER button off and back on, always wait for an interval of at least 5 seconds. Rapid switching may lead to errors or malfunctions.
•For a complete electrical disconnection, pull out the main plug.
nOperation Mode
When the monitor is turned on for the first time after being shipped from the factory, the operation mode setting screen will be displayed. Set it to Mode1 or Mode2.
Mode1......If there is no operation for 4 hours or more, the
monitor automatically turns off the power. Mode2......Will perform standard operation.
Even after being set, changes can be made using [Operation Mode], located in the menu of the monitor.
Turning off the power
1.Turn off the PC.
2.Depress the POWER button for around 2 seconds.
POWER button
Depress for around 2 seconds
The power LED turns off.
Caution
•If the monitor will not be used for a long time, disconnect the power plug from the power outlet.