Sharp 70LE847U, 80LE844U Watching TV, Antenna & Cable/STB, TV Location, Air/Cable Antenna setting

Watching TV

3Press a/b to select the time zone where you are using the TV, and then press ENTER.

Example

EST

CST

MST

PST

AKST

HAST

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

6Press c/d to select "Antenna & Cable" or "Set- top box", and then press ENTER.

Antenna & Cable Set-top box

•The time zone differs depending on the selected country.

•The factory preset value is the time zone for the capital of the selected country.

4Press a/b to select the Daylight Savings Time, and then press ENTER.

Auto

Manual

Off

• “Auto” is the default selection.

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR in Home mode default setting.

5Press c/d to select "Home" or "Store". Press ENTER to enter the setting.

Select

Home Store

Home: "Power Saving" is set to "Advanced", and AV MODE is set to "STANDARD".

Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off".

•If you select "On" and there is no operation for 30 minutes:

-AV MODE will be reset to "DYNAMIC (Fixed)" and, when a 3D signal is detected, 3D images will switch to 2D images.

•When "Off" is selected:

-AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

To watch TV via an antenna or cable connection (without using a set-top box):

Select "Antenna & Cable", and then go to step 7.

To watch TV via a set-top box:

1 Select "Set-top box", and then press ENTER. 2 To watch TV, select the input source

corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press c/d to select "On", and then press ENTER.

On
	Off

•When this is set to "On", the channel on the TV cannot be changed using the remote control unit or menu. (e.g. CH U/V, Favorite CH, etc.)

•See page 34 for details on the Input Skip function.

3 Press INPUT to select the input source corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment.

•See the operation manual of the connected equipment for setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

7Press c/d to select "Air" or "Cable". Press ENTER to enter the setting.

Air
	Cable

•ENERGY STAR qualifi cation is based on AV MODE "STANDARD".

20