Appendix
Troubleshooting
Problem | Possible Solution |
|
|
• No power | • Check if you pressed POWER on the remote control unit. Page 19 |
•Is the AC cord disconnected? Page 10
•Has the power been turned on? Page 19
• Unit cannot be operated. | • External infl uences such as lightning, static electricity, may cause improper | |
| operation. In this case, operate the unit after fi rst turning off the power of the TV or | |
| unplugging the AC cord and replugging it in after 1 or 2 minutes. | |
|
| |
• Remote control unit does not | • Is the equipment to be operated by the remote control unit set correctly? Press TV | |
operate. | to set the remote control unit to the setting for operating the TV. | |
| • Are batteries inserted with polarity (e, f) aligned? Page 11 | |
| • Are batteries worn out? (Replace with new batteries.) | |
| • Are you using it under strong or fl uorescent lighting? | |
| • Is a fl uorescent light illuminated near the remote control sensor? | |
| • Is "RC Control Lock" selected in "Operation Lock Out"? Page 35 | |
|
| |
• Picture is cut off/with sidebar | • Is the image position correct? Pages 34 and 63 | |
screen. | • Are screen mode adjustments such as picture size made correctly? | |
| Pages 26 and 62 |
|
|
|
|
• Strange color, light color, or color | • Adjust the picture tone. | Pages 29 and 30 |
misalignment | • Is the room too bright? The picture may look dark in a room that is too bright. | |
|
|
|
• Power is suddenly turned off. | • Is the sleep timer set? | Page 23 |
| • Check the power control settings. Page 32 | |
| • The unit's internal temperature has increased. Remove any objects blocking vent or | |
| clean. |
|
• No sound | • Is connection to other components correct? Pages 14 to 18 and 57 |
•Is the volume too low? Page 23
•Is "Variable" selected in "Output Select"? Page 34
•Have you pressed MUTE on the remote control unit? Page 23
•Check the audio output of the connected external equipment. Is the volume too low or muted?
•When external equipment is connected via an HDMI cable, you may need to confi gure the audio to be output through the HDMI cable.
•When audio is not output from external equipment connected to the PC IN or HDMI 2 terminal, check the "Audio Select" setting. Page 63
•Even when external equipment is connected using an
•When connecting a PC via an
-Is the audio output of the PC confi gured correctly? Check the audio output settings and output audio format in Sound Properties on the PC.
The audio formats compatible with this TV are PCM, Dolby Digital. With other formats, audio cannot be output.
-Depending on the board, only video signals may be output. In this case, in addition to connecting an
Ø3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". Page 63
•If you are using a
-Is an audio cable connected? The
-Is HDMI 2 being used? When the TV is connected to another HDMI terminal, the audio and video are not output together even if a Ø 3.5 mm stereo minijack cable is connected to the shared AUDIO IN terminal for PC IN and HDMI 2.
-Check the "Audio Select" setting. Set "Audio Select" to "HDMI+Analog". Page 63
83