Technika LCD32-909V manual PC Mode Menu System, Source Menu, PC Position Menu, Delete

Delete

To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the following programmes shift one line up.

APS (Auto Programming System)

When you press the BLUE button for starting automatic tuning, Auto Programming System menu will appear on the screen:

Country

Press “” or “” button to select your country. If you want to exit from A.P.S. function, press the BLUE button.

When you press OK or RED button for starting automatic tuning, all stored programmes will be erased and the TV will search for available channels. During the search, the following OSD will be displayed:

Whenever you press the BLUE button, APS function stops and Program Table appears on the screen.

If you wait until the end of APS, Program Table will be displayed with the programmes found and located.

Source Menu

Press “” or “” button and select the sixth icon. Then press “” or OK button. Source menu appears on the screen:

In source menu, highlight a source by pressing “” or “” button and switch to that mode by pressing “” button. Source options are; TV, DTV, EXT-1, EXT-2, FAV, HDMI-1, HDMI-2, YPbPr or PC-VGA.

Note: Once you have connected optional equipment systems to your TV, you should select the required input to view pictures from that source.

PC Mode Menu System

See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.

For switching to PC source, press “SOURCE” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode.

Note that PC mode menu settings are available only while the TV is in PC source.

PC Position Menu

Select the first icon by pressing “” or “” button. PC Position menu appears on the screen:

English - 36 -

MB35_[GB]_SSM_32882W_1810UK_IDTV-PANEU_BRONZE2_10063798 _ 50153877.indd 36 24.08.2009 08:47:32