Setting Up Anynet+, Switching between Anynet+ Devices

xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Changes Anynet+ mode to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
	the DVD recorder will appear.
(device_name) INFO	Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
	play menu of the DVD recorder will appear.
Recording: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦¦ Setting Up Anynet+

OO MENUm→ Application → Anynet+ (HDMI-CEC) → ENTERE

■■ Setup

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. ✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎✎ The active source on the TV must be set to TV to use the Anynet+ function. ✎✎ Even if an external device is still recording, it may turn off.

¦¦ Switching between Anynet+ Devices

1.Anynet+ devices connected to the TV are listed.

✎✎ If you cannot find a device you want, press the Red button to refresh the list.

2.Select a device and press the ENTEREbutton. You can switch to the selected device.

✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

¦¦ Recording

You can make a recording of a TV Program using a Samsung recorder.

1. Select Recording.

✎✎ When there are more than two recording devices

✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.

2.Press the EXIT button to exit.

✎✎ You can record the source streams by selecting Recording: (device_name).

✎✎ Pressing the �(REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

English 27

04Features Advanced

Shows the Anynet+ device list.

the DVD recorder will appear.

play menu of the DVD recorder will appear.