Sharp 430 Securing the TV to the Wall, Accessories 05InformationOher TV-Holder, Screw M4 X L16

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

Accessories

05InformationOher

TV-Holder Screw (M4 X L16)

To prevent the TV from falling

1.Remove the screw attached to the back of your TV, then connect the Holder-TV to the TV with the screw. ✎✎ Make sure to only use the supplied screw.

2.Firmly fasten the screw to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the

screw fastened on the wall or cabinet so that the TV is fixed.

✎✎ Only the screw needed to attach the holder to the TV is supplied. The screw to attach the Holder to the wall or cabinet must be purchased separately. We recommend purchasing a size M4xL20 wood screw.

✎✎ Install the TV close to the wall so that it does not fall.

✎✎ When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes. ✎✎ Check the cord occasionally to make sure it is secure.

✎✎ Before moving the TV, separate the connected cord first.

3.Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

English 31