VPRG4
Installation Instructions
Return Air Grille/Access Panel
For Vert-I-Pak A Series Units only
.
Please read these instructions completely before attempting installation.
NOTE: These instructions apply to
Parts Included in this Kit
VPRG4 Return Air Grille / Access Panel (58" Tall x 29" Wide)
2x Mounting Bracket (left and right)
Mounting Screws
Parts not Included in this Kit
25" x 20" Filter
5/32" Allen wrench for latch mechanism operation
Frame and sheetrock the access hole to 27" wide and 553/4" tall. The bottom of the opening should be at the same level as the floor or subbase. The chassis must fit thru this opening. The chassis is 231/8" wide and 321/4" or 47" tall (consult chassis specifications for actual dimensions).
| Filter mounts on |
Side Bracket | inside of door. |
|
25" x 20" Nom. Filter
(field supplied)
VPRG4
Return Air Grille /
Access Panel
