Friedrich VPRG4 A, Mounting the Side Bracket, Mount the Door on the Side Bracket, Latch mechanism

Step 2A

Mount the Side Bracket to the left side of the wall opening. The Side Bracket must be plumb (vertical). Secure with four

#8 x 11/4" pan-head screws. NOTE: Hinge tabs must point upward.

Mounting the Side Bracket

Step 4A

Close the door. Draw a temporary horizontal reference line on the wall adjacent to the center of the latch mounting hole.

Latch	Draw
mounting	Reference
hole in door	Line on wall

Step 3A

Install door onto the Side Bracket. Be sure that the access door has engaged the three tabs, and the door is against the side mounting bracket.

Mount the Door on the Side Bracket

Step 5A

Attach the latch bracket to the opening, aligning the bottom of the bracket with the reference line. Use two

#18 x 11/4 screws.

Do not tighten.Reference

Line

Latch Bracket Installation

Step 6A

Slide the bracket upward and tighten the mounting screws.

Latch mechanism

NOTE: The latch mechanism should already be factory mounted. This assembly is shown for reference. The latch arm is adjustable to provide

asecure, rattle-free installation. Install the filter.

Access Panel

Latch Arm

Installing Latch Bracket

Latch Mechanism

Orientation markings

Side View

Front View

Mounting Latch