Friedrich VPRG4 Installation Instructions, Return Air Grille/Access Panel, Filter mounts on

VPRG4

Installation Instructions

Return Air Grille/Access Panel

For Vert-I-Pak A Series Units only

.

Please read these instructions completely before attempting installation.

NOTE: These instructions apply to Vert-I-Pak Series units only. Refer to Chassis Installation/Operation Manual for additional information

Parts Included in this Kit

VPRG4 Return Air Grille / Access Panel (58" Tall x 29" Wide)

2x Mounting Bracket (left and right)

Mounting Screws

Parts not Included in this Kit

25" x 20" Filter

5/32" Allen wrench for latch mechanism operation

Frame and sheetrock the access hole to 27" wide and 553/4" tall. The bottom of the opening should be at the same level as the floor or subbase. The chassis must fit thru this opening. The chassis is 231/8" wide and 321/4" or 47" tall (consult chassis specifications for actual dimensions).

	Filter mounts on
Side Bracket	inside of door.

25" x 20" Nom. Filter

(field supplied)

VPRG4

Return Air Grille /

Access Panel

920-134-04 (2-10)