Program

RANDOM PLAYBACK

You may determine the order in which tracks will play.

1 In stop mode, press [MODE].

MODE

•The “PROGRAM” screen will appear.

2 Press [▲ ] or [▼] to select a track, then press

[ENTER].

TOTAL 1:03:30
1	3:30
5	5:10
10	4:20	ENTER
11	3:00
12	3:20
17	4:10
22	2:50
1/4	2/3

•Press [CLEAR] to erase the most recently entered track.

•If the entire Program cannot be displayed at once on a screen, “ G” appears to go to the next page and “ H” appears to go back to the previ- ous page.

3 Repeat step 2 until you have selected all the tracks you want to play in the program.

4 Press [PLAY O] to play the programmed tracks.

PLAY

NOTE

•While the program is being played back, pressing [STOP C] works as follows.

•Press [STOP C] once and then [PLAY O] again, playback will restart from the point where [STOP C] was pressed. (Program con- tinued)

•Press [STOP C] twice and then [PLAY O] again, playback will restart from the track in the usual way. (Program canceled)

•Up to 99 tracks can be entered.

•To erase all tracks in the program at once, select “ALL CLEAR” at the bottom of the list at step 2.

•If you like to repeat the current track in the program, press [REPEAT] several times until “ TRACK” appears during playback. If you

like to repeat the entire program press [REPEAT] several times until “ ALL” appears during playback.

This function shuffles the playing order of tracks instead of playback in the sequence.

1 In stop mode, press [MODE] twice.

		RANDOM
		CD-DA	TOTAL 0:45:55
MODE	twice
	twice		- - no indication - -
		RANDOM PROGRAM
		PLAY

•“RANDOM” screen appears.

2 Press [PLAY O] to start random playback.

PLAY

NOTE

•If you like to repeat the current track in the ran- dom selection, press [REPEAT] several times until “ TRACK” appears during playback. If

you like to repeat the entire random selection press [REPEAT] several times until “ ALL” appears during playback.

– 24 –