Symphonic LCD TV/DVD Preparation for USE, ANTENNA/CABLE Connection, If YOU have a Wired Cable

Page 9

PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

NOTE

•Cables used here are commercially available.

•For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack before moving the unit.

- ANTENNA/CABLE CONNECTION

[Rear of this unit]

from Cable Company or Satellite Antennna

RF Cable

ANT

IF YOU HAVE A JACK ON THE WALL

Connect the TV to the wall-mounted antenna jack with on RF cable (commercially available).

IF YOU HAVE A WIRED CABLE

Connect the TV to the wired antenna cable.

NOTE

•Before plugging the antenna into the ANT jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT jack of the unit.

Bent pin

Cable Plug

(Needs to be	(Straight pin)
straightened)

- CABLE/SATELLITE BOX CONNECTION

[Rear of this unit]	WHEN USING CABLE BOX/SATELLITE
	BOX

ANT

Cable Box

or Satellite Box

OUT IN

75-ohm Coaxial Cable

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown above.

Channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the remote control of this unit.

from Cable Company or Satellite Antenna

NOTE

Note to CATV system installer:

•This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

- 9 -

EN

Image 9

Contents CSTL20D5 20 inch Risk of Electric Shock Do not Open PrecautionsImportant Copyright Information Symbols Used in this Manual Supplied AccessoriesLocation Tilt StandTable of Contents TV Mode FeaturesOperating Controls and Functions Remote ControlInstalling the Batteries Battery PrecautionsFront Panel Preparation for USE If YOU have a Wired CableANTENNA/CABLE Connection If YOU have a Jack on the WallVIDEO1 Input External ConnectionVIDEO2 Input Audio OutputTV Operation and Settings TV Operation and SettingsWatching a TV Program To Watch Cable or Satellite ChannelChannel SET UP Auto Channel ProgrammingADDING/DELETING Channels Sleep Timer Back Light SettingPicture Control Press SleepPress Audio repeatedly to select the MTS output mode To Select TV Sound ModeClosed Caption System To Check the Sound StatusChip SET UP Chip SET UPTV Rating SET UP Press Setup then press K or L to point to V-CHIP SET UPChange Access Code Mpaa Rating SET UPPress Setup then press K or L to point to Language Menu LanguagePlayable Discs About the DiscsUnplayable Discs About the DiscsPlaying a Disc Basic PlaybackGetting Started Title Menu Disc MenuResume PauseDuring playback, press FWD D or REV E Slow Forward Slow ReverseTo return to normal playback, press Play O Press Zoom during playbackTrack Search Search FunctionTitle / Chapter Search FunctionEnter Time SearchRepeat Special Playback FunctionClear Special Playback FunctionProgram Stereo Sound Mode Changing the SettingsAudio Language Subtitle LanguageBlack Level Setting Camera AngleReturn ON-SCREEN Information Changing the Settings / the ON-SCREEN InformationLanguage Setting Changing the DVD SET UP ItemsDisplay Setting Custom MenuChanging the DVD SET UP Items Audio SettingParental Control Press K or L to select the below items then press EnterInitialize Other SettingsCable Channel Designations Language Code ListAdjust Contrast & Brightness control Troubleshooting GuideClosed Caption Problem Possible Remedy Eject a DVD ModeSpecifications MaintenanceDisc Handling DVDFunai Corporation