Symphonic COLOR TV/DVD owner manual Mpaa Rating SET UP, Change Access Code

MPAA RATING SET UP

Make sure ...

•TV/DVD power must be turned on.

1 Select “V-CHIP SET UP”

CHANGE ACCESS CODE

To change access code, follow the steps.

1Select “V-CHIP SET UP”

Press SETUP on the remote con-

trol.

Press Arrow (K/L) to point to “V-

CHIP SET UP”. Then press ENTER.

2Enter 4-digit access code

Press the number buttons. The default code is 0000.

TV RATING

Press Arrow (K/L) to point to B MPAA RATING

CHANGE CODE

“MPAA RATING”. Then press ENTER.

4Select your desired item

Press Arrow (K/L) to point to your

[BLOCK] or [VIEW].

•When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.

•When you turn “G” to [VIEW], all ratings will turn to [VIEW] automatically.

5Exit the V-Chip setting mode

Press SETUP on the remote control to return to origi- nal mode.

3 Select “CHANGE CODE”

Press Arrow (K/L) to point to “CHANGE CODE".

Then press ENTER.

4Enter 4-digit access code

Press the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.

5Exit the V-Chip setting mode

Press SETUP on the remote control to return to orig- inal mode.

NOTE:

•If you unplug the power cord or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.